Skip to main content

Floor plan vs blueprint vs elevation

Floor plan = top-down view. Elevation = side view. Blueprint = old term for any architectural drawing (originally white-on-blue prints).

5 min readUpdated 2026-11-17

The terms get used interchangeably in casual conversation but mean different things in architecture and construction.

The short version: a floor plan looks down on one floor, an elevation looks straight at one side, a section slices through the building, and a blueprint is just an old name for a printed set of these drawings. A rendering is a picture of what it will look like. Each answers a different question — where things are, how high they are, how they're built, what it will feel like — which is why a full set of drawings uses all of them.

Below, the same two-bedroom apartment is shown each way in RoomSketch3D: the plan in the editor, a black-and-white export that reads like a blueprint, its elevations, and the 3D view.

In this guide

  1. 1

    Floor plan

    Top-down view of one floor of a building, drawn as if sliced horizontally about 4 feet above the floor. Shows walls, doors, windows, fixtures, and (often) furniture. Used for: Layout planning, construction, real estate listings, interior design. What it can't show: heights. A plan tells you a window is 4′ wide and where it is on the wall, but not how high its sill is or how tall the ceiling is. For those you need an elevation or a section. Every RoomSketch3D design is a floor plan first; see how to read a floor plan.

    The floor plan: walls, doors, windows and furniture from above, with dimensions.
  2. 2

    Elevation

    Side view of a building — what one face looks like from outside. Four typical elevations: North, South, East, West. Shows: Window placement, exterior cladding, roof shape, building height — anything visible from one side. An elevation is drawn flat-on, with no perspective, so every height and width can be measured. That is where you read the numbers a plan can't give: the wall height, the height of a window's head and sill, the size of a door. Because you stand outside looking at the wall, left and right are reversed compared with the plan for the back (top) wall: a window near the left end of that wall on the plan appears near the right end of its elevation.

    Elevation views → Bottom: the front wall seen flat-on — 30′ long, 9′ tall, the 3′ entry door centered with 13′ 6″ either side.
  3. 3

    Elevations in RoomSketch3D

    Tap Elevation views (the building icon at the top right of the plan) to see each outside wall straight-on, named by the side of the plan it's on — Top, Left, Bottom, Right (tap the pencil to rename a side, e.g. Front or North). Dimensions labels the wall height, every window and door width, the gaps between them and each window's head and sill height; Show outline draws the elevation as a line drawing. To hand them to someone, tick Elevation views in the export dialog: PNG export adds the four elevations as separate images, PDF adds them as extra pages. See elevation views.

    An exported elevation (Right side): two 4′ windows with 6′ 6″ head height and 2′ 6″ sills on a 26′ × 9′ wall.
  4. 4

    Blueprint

    Historical term for a copy of an architectural drawing, originally produced as white lines on a blue background (the 'blueprint' process). Now refers (loosely) to any technical drawing — floor plan, elevation, section, etc. Today: Most drawings are produced digitally (CAD) and printed on white paper. 'Blueprint' is colloquial. What people usually mean by "blueprint style" today is a crisp black-and-white line drawing with no colours or shading: easy to photocopy, mark up with a pen and read on a job site. RoomSketch3D can draw your plan that way on screen (Settings → General → Plan style → Black & white) or just for one export (the Black & white box in the export dialog). See black and white plan style.

    The same plan exported in Black & white: the line drawing people usually mean by a blueprint.
  5. 5

    Other drawing types

    Section — a vertical slice through the building, showing what's inside the walls and how floors stack. Detail — a close-up of a specific construction detail (door jamb, eave, foundation). Sketch — a quick, informal hand-drawn version. Rendering — a 3D photo-realistic image showing what the finished building will look like. RoomSketch3D gives you the plan, the elevations, a live 3D view you can walk through and, from it, AI renders (see create photorealistic renders). It does not produce structural sections or construction details; those come from an architect or engineer.

    The 3D view of the same plan — closer to a rendering than a drawing: no dimensions, but you see the space.
  6. 6

    Which one to use

    You want to…Use
    Arrange furniture, check walkways, plan roomsFloor plan
    Get window, door and wall heights; plan cabinets or shelving on a wallElevation
    Show a contractor how walls, floors and roof are builtSection and details (from a designer or engineer)
    Send a clean drawing to a builder, landlord or permit deskBlack & white plan export (plus elevations)
    See and share what it will feel like3D view, AI render

    To send plan and elevations together, open Export / Print / Share → PNG/JPG/PDF or Print and tick Elevation views under Options.

    Export / Print Floor Plan → Options → Elevation views adds the four elevations to a PNG or PDF export.

Tips

Plan and elevation together

When you ask for a quote on windows, cabinets or a wall of shelves, send the plan and the elevation of that wall. The plan says where; the elevation says how high.

Name the sides

Rename the elevation sides to Front, Back, Left and Right (or North, South…) before exporting, so the person reading them knows which wall is which.

Common confusions

Asking for a 'blueprint' when you need a permit set

A building department usually wants specific drawings (site plan, floor plans, elevations, sections, structural details) drawn to its rules. A floor plan from a planning app is a great start for the conversation, but check what your local department requires.

Reading an elevation as if it were the plan

An elevation is seen from outside, so the back wall's left and right are swapped compared with the plan. Match windows by their dimensions, not by which side they're on.

Frequently asked questions

Is a floor plan the same as a blueprint?

Not exactly. A floor plan is one type of architectural drawing (a top-down view of one floor). 'Blueprint' is a colloquial term for any technical drawing — floor plans included, but also elevations, sections, and details.

What's an elevation in architecture?

A side view of a building — what one face looks like from outside. A complete drawing set includes four elevations (one per side).

What's the difference between an elevation and a section?

An elevation shows the outside of one face. A section cuts through the building and shows the inside: wall build-up, floor and ceiling heights, stairs.

Can RoomSketch3D make elevations?

Yes. Elevation views at the top right of the plan shows each outside wall straight-on with dimensions, and the export dialog's Elevation views option adds all four to a PNG or PDF.

Can I export a black-and-white 'blueprint' style plan?

Yes. Tick Black & white in the export dialog for one file, or set Settings → General → Plan style → Black & white to draw that way all the time.

Start designing your room

Draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android