Wall types — full, railing, and open
Not every wall is solid floor-to-ceiling. Three wall behaviors cover residential applications: full (standard wall), railing (waist-high safety barrier), and open (logical boundary, no physical wall). Comprehensive reference for when to use each.
Not every wall on a plan is a solid floor-to-ceiling wall. Most homes mix three behaviours: a full wall that closes a room off, a railing (a waist-high barrier you can see over, also called a half wall, pony wall, knee wall or guard), and an open side where there's no wall at all, such as a porch edge or the side of a room that runs straight into the next one.
In RoomSketch3D an outside wall has a Type (Wall, Railing or Open) and an interior wall has a Style (Full, Pony, Glass, Railing or Partition). This page explains when each one is the right choice, what the real-world numbers are, and exactly where to set each in the app, with what it looks like on the plan and in 3D.
In this guide
- 1
Select the wall and find Type
Tap or click an outside wall on the plan. Its panel opens under the plan with Type: Wall | Railing | Open, plus Length, Height, Thickness, Is Load-bearing? and Remove. Every wall starts as Wall: solid, floor to ceiling, at the floor's ceiling height (8 ft unless you changed it). Use a full wall for every wall that has to keep out weather, sound or eyes: the building's outside walls, bedrooms, bathrooms, offices, and the walls between rooms with different jobs. It's also the kind to mark Is Load-bearing? when you plan a renovation (the plan then hatches it with diagonal stripes). When in doubt, leave it as Wall.
Type sits at the top of the wall's panel: Wall, Railing or Open. - 2
Turn it into a railing and pick a style
Choose Railing. The wall on the plan turns into a striped line and a Style row appears: Spindle, Pony Wall, Glass, Horizontal Slat, Cable, Wrought Iron or Picket. Spindle is the starting style. In 3D the railing is drawn 42 in (3 ft 6 in) tall as long as the wall's Height is at the room default. A height you pick in the Height row is used for the railing itself (8 ft would make an 8 ft railing), so if you raised this wall earlier, tap Default next to the height presets first. When a railing is the right call: the open edge of a balcony, deck, porch, loft or mezzanine; a stair landing or the side of a stair opening; or an open-plan divider where you want to see across the room but still mark the edge. A railing keeps people from falling or walking through while leaving the view, the light and the conversation open above it. Style is the look. Spindle and picket read traditional, glass keeps a view clear, cable and horizontal slat read modern, wrought iron reads classic, and a pony wall is a solid low wall (good where you want a ledge or to hide clutter). More on each in railing styles.
Railing turns the wall into a striped line and adds the Style row. - 3
Check the railing in 3D
Open the 3D view to see the real proportions: a spindle railing is a row of balusters under a top rail, and the room behind it stays visible. Switch to Glass and the same edge becomes clear panels under a thin rail, which is why glass is the usual pick for a view or a small room that shouldn't feel boxed in. How tall should a real railing be? In the US, house codes commonly require a guard where a floor, deck or landing is more than about 30 in above the level below, and the guard is commonly at least 36 in tall, with gaps small enough that a 4 in ball can't pass through. Multi-family and commercial buildings often need 42 in. Local codes vary and change, so check with your building department before you build. In the plan, a railing is a design marker: it shows where the guard goes and how it looks.
Spindle: balusters under a top rail. The room behind stays in view. - 4
Compare with a glass railing
Glass, cable and horizontal slat are the styles that block the least view. Glass reads lightest in 3D: the edge almost disappears, which is what most people want on a balcony with a view or a loft over a living room. Pony wall is the opposite, a solid low wall that gives a sense of enclosure and a ledge on top.
Glass: clear panels and a thin rail, the lightest-looking edge. - 5
Open a side completely
Choose Open to take the wall away with nothing in its place. The side becomes a dashed gap in the outline with a + in its middle, and nothing is drawn in 3D. Tap the + (or choose Wall again) to put the wall back. Tapping Remove on an outside wall leaves the same kind of gap. Details in gaps in an outside wall. Open is not a doorway. An open side has no header above it and no jambs at its ends: it's simply no wall, the way the edge of a covered porch or a carport looks. If you want a finished passage through a wall, keep the wall and add an Opening from Doors & Windows instead (see openings and passageways). To name an open-plan zone that has no wall of its own, add a room label from the View & Layers menu (Add label) rather than drawing a wall you then open.
Open leaves a dashed gap. The + puts the wall back. - 6
Interior walls: pick a Style
Select an interior wall (drawn with Interior Wall in the Build panel, see drawing interior walls) and use Style: - Full: a full-height solid wall, floor to ceiling unless you type a Height. - Pony: a half-height knee wall, starting at 42 in. Classic for a kitchen-to-living divider or a stair side. - Glass: a glass panel, for a shower screen or a glass office partition. - Railing: a spindle railing, for a loft edge or stair opening inside the house. - Partition: a yard zone divider, dashed on the plan and hidden in 3D. Pony, Glass and Railing start at 42 in; type any Height you need (for example 36 in for a counter-height divider). The same panel has Thickness, Is Load-bearing?, Duplicate and Delete. Paint and textures aren't on the wall panel; they're under Materials → Surfaces → Wall Paints (see paint your walls).
Interior walls use Style; Pony starts at 3 ft 6 in. - 7
When to use each
Use a full wall (Wall / Full) when: - It's an outside wall of a closed room — it has to keep out weather. - Bedrooms, bathrooms, offices — anywhere privacy or quiet is needed. - The rooms on each side have different jobs (kitchen vs bedroom, garage vs house). - You're not sure. Full is the default. Use a railing (Railing / Pony / Glass) when: - Lofts and mezzanines look down into a double-height room. - Stair landings and stair openings — the open side of a stair or the hole in the floor above it. - Decks, porches and balconies with a drop below the edge. - Open-concept rooms where you want to mark an edge but keep the view: a half wall by the kitchen (Pony, about 36–42 in) separates the cooking zone from the living room while you can still see and talk across it. Use Open when: - An outside edge really has no wall: a covered porch, a carport, the open side of a patio. - You're about to take a wall out in a renovation and want the plan to show the result (the + brings it back). - Inside the house, two zones of one open-concept space share no wall at all — then don't draw a wall; label the zones instead. For a finished passage through a wall (with a header above), keep the wall and add an Opening instead.
- 8
Code and safety considerations
A railing on the plan stands for a guard in the real building, and guards have code rules. Under the 2021 International Residential Code: - Where a guard is required: on open sides of floors, decks, landings and stairs more than 30 inches above the floor or grade below, measured within 36 inches horizontally of the edge (R312.1.1). - Height: at least 36 inches; on the open sides of stairs at least 34 inches measured from the nosings (R312.1.2). - Openings: a 4-inch sphere must not pass through; up to 6 inches at the triangle under a stair's bottom rail, and up to 4⅜ inches on the open sides of stairs (R312.1.3). - Strength: guards must resist a 200 lb concentrated load (Table R301.5). Buildings covered by the International Building Code use 42 inches (IBC 1015.3), with a 36-inch exception inside R-3 and low-rise R-2 dwelling units. These are model-code minimums; local codes vary, so confirm with your building department. What the app does: an outside wall set to Railing is drawn 42 in tall in 3D (while its Height is at the room default), and an interior Pony, Glass or Railing wall starts at 42 in, and its Height row offers railing heights (36, 42 and 48 in) or any height you type — so you can show a 36-inch guard or a 42-inch one. The app doesn't check baluster gaps or strength; it shows where the guard goes and how it looks. Other practical differences: a full wall gives privacy and blocks sound; a railing gives a fall barrier with no privacy above it; an open side gives neither. Railings and pony walls are not usually load-bearing — check before cutting down a full wall to make one.
Tips
Railing on a loft or upper floor
Where an upper floor looks down into a double-height room, make that edge a Railing (outside wall) or draw an interior wall along it with Style: Railing, Pony or Glass. In 3D you can then check sightlines from below before anything is built.
Half wall between kitchen and living
A pony wall about 36 to 42 in tall marks the kitchen without closing it off: you can still see the living room while you cook, and the top makes a ledge. Use an interior wall with Style: Pony and type the height you want.
Keep the edge when the wall comes out
Planning to remove a wall? Set it to Open (outside wall) instead of deleting the floor area, so the plan still shows where it was and you can put it back with one tap on the +.
Match the railing to the house
Spindle or picket suits a traditional house, glass or cable a modern one, wrought iron a classic one. The railing is one of the strongest style signals in a 3D view, so pick it before you show the design to anyone.
Common confusions
Using Open where you meant a doorway
Open removes the wall completely: no header, no jambs, nothing in 3D. For a cased opening or an arch through a wall, keep the wall and place an Opening on it.
Treating the plan railing as a code check
The app shows where a railing goes and how it looks; it doesn't check its height or baluster gaps against your local code. Confirm guard rules with your building department or builder.
A railing on a wall that must keep out weather
An outside wall set to Railing is open above the rail, so it only makes sense where the space really is open: a porch, a balcony, a loft edge. For a closed room, keep Wall and use a low window or a door instead.
Frequently asked questions
What's the difference between a full wall and a railing?
A full wall is solid floor to ceiling and separates rooms completely (sight, sound, temperature). A railing is a waist-high barrier (42 in in RoomSketch3D's 3D view) that stops falls and marks an edge while leaving the space open above it.
How do I change a wall to a railing in RoomSketch3D?
Outside wall: select it and set Type to Railing, then pick a Style (Spindle, Pony Wall, Glass, Horizontal Slat, Cable, Wrought Iron or Picket). Interior wall: select it and pick Railing, Pony or Glass under Style.
How do I remove one side of a room completely?
Select the outside wall and set Type to Open, or tap Remove in its panel. It becomes a dashed gap with a + that puts the wall back. See gaps in the outline.
How tall should a railing be?
A common US house rule is a guard at least 36 in tall wherever the drop is more than about 30 in, with openings a 4 in ball can't pass through; buildings under the International Building Code ask for 42 in (2021 IRC R312.1.1–R312.1.3; IBC 1015.3). Codes vary by place and edition, so check yours. In the app, an interior Pony, Glass or Railing wall starts at 42 in; its Height row offers 36, 42 and 48 in, or type your own.
When should I use a half-wall?
Where you want to mark an edge but keep the room open: a kitchen-to-living divider, the open side of a stair, a loft or mezzanine edge, or a landing. Where the drop on the other side is more than 30 in, it also has to work as a guard (at least 36 in tall under the 2021 IRC R312.1.2). In RoomSketch3D draw an interior wall and set Style to Pony (or Glass / Railing), then type its Height.
Can I have a half-wall on an exterior wall?
Yes, where the space really is open — a porch, deck, balcony or loft edge: select the outside wall and set Type to Railing, then pick Pony Wall (solid) or another Style. For a closed, heated room, keep the outside wall as Wall: a railing is open above it, so it can't keep out weather. If you want a low opening in a closed room, use a full wall with a window.
What is a Partition wall?
Partition is the interior wall style for dividing yard zones: it's dashed on the plan and hidden in 3D. For an indoor glass partition, use Glass.
Sources
- 2021 International Residential Code — R312.1.1–R312.1.3 guards; Table R301.5 guard load — Unamended 2021 IRC as adopted by Colorado, read on UpCodes. Local codes vary.
- 2021 International Building Code — 1015.3 guard height — 42 in, with a 36 in exception inside R-3 and low-rise R-2 dwelling units.
Start designing your room
Put this into practice in the floor plan maker: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.
Open RoomSketch3DOne-time purchase · No subscription · Web, iOS & Android