Skip to main content

Wall mirrors and built-ins

Wall-mounted mirrors are wall fixtures, not furniture. Three shapes; sized to wall and use; hung at a height that suits the people using them.

4 min readUpdated 2026-11-16

Wall mirrors are wall-mounted fixtures with real position on a wall, fixed height above floor, and clear footprint affecting what else can go on that wall.

Quick answer: over a vanity, make the mirror about as wide as the sink cabinet (or the counter, for a double vanity) and hang it with its bottom edge a few inches above the counter — the 2010 ADA Standards cap the bottom of the reflecting surface at 40 inches above the floor over a lavatory, which suits seated users and children too.

The example below is a 24 × 36 inch mirror over a 30-inch vanity, its bottom edge at 3 ft 4 in (40 inches), with a GFCI outlet beside it.

In this guide

  1. 1

    Sizes by use

    Bathroom vanity mirror: 24-48 inches wide × 30-40 inches tall. Matches vanity width. Entryway mirror: 24-36 inches wide × 36-60 inches tall. Full-length/dressing mirror: 18-24 inches wide × 60-72 inches tall. Decorative wall mirror: highly variable — round 18-48 inches diameter; large statement mirrors up to 60+ inches square.

    WhereWidthHeightBottom edge
    Single vanity24–30 in30–36 in4–6 in above counter
    Double vanity48–72 in (or two)30–40 in4–6 in above counter
    Entry24–36 in36–60 inabout 36–48 in
    Full length18–24 in60–72 in6–12 in

    These are design guidelines; only the accessible-mirror height below is a published standard.

    A 2' mirror centered over a 30" vanity. On the plan a mirror is a thin bar on the wall.
  2. 2

    Mounting heights

    Bathroom vanity: center 60-65 inches above floor (a few inches above sink). Entryway: bottom 36-48 inches above floor; center around eye height (~63 inches). Decorative: center at eye height (~60-65 inches) — same rule as art. Accessible bathrooms: the 2010 ADA Standards (603.3) put the bottom edge of the reflecting surface no higher than 40 inches above the floor where the mirror is over a lavatory or countertop, and no higher than 35 inches where it isn't. Private homes usually don't have to comply, but the rule is a good one for any bathroom used by children or wheelchair users.

  3. 3

    Shapes

    RoomSketch3D supports rectangle, round, and oval mirrors. Select a mirror and pick Rect, Round or Oval under Shape. On the 2D plan a mirror is always drawn as a thin slab on the wall, whatever its shape. Tilt (0°, 45°, 90° or the rotate arrows) turns a rectangular or oval mirror in the plane of the wall — useful for a diamond-hung mirror.

  4. 4

    In RoomSketch3D

    Mirrors aren't in the Build panel; they're items in the Furnish catalog (the Mirrors category). Search mirror and pick one, such as Round Mirror 20", Rectangular Mirror 24×36" or Oval Mirror 24×36". Picking it puts you in placement mode: tap the wall where it hangs. Select the mirror and its settings show Width (presets 2'–5'), the two Along wall distances (← → or ↑ ↓), Shape (Rect / Round / Oval), Tilt, Height, Mount (the height of the mirror's bottom edge above the floor) and In / Out for which face of the wall it hangs on (In is the room side).

    Mirror: Width, position, Shape, Tilt, Height and Mount (bottom edge 3' 4" = 40").
  5. 5

    Check it in 3D

    In 3D the mirror hangs at its Mount height and reflects the room. Check the gap between the counter and the mirror (6 inches here: a 34-inch vanity and a 40-inch mount) and that the outlet beside it isn't hidden behind the mirror's edge.

    The mirror in 3D, 6" above the vanity top, with the outlet beside it.

Tips

Leave room for the outlet and light

Bathroom outlets must be within 36 inches of the basin (2021 IRC E3901.6). Place the mirror first, then the outlet just beyond its edge.

Frequently asked questions

How high should I hang a bathroom mirror?

Center 60-65 inches above floor — a few inches above the sink. For accessibility, keep the bottom of the glass at or below 40 inches (2010 ADA 603.3).

Where are wall mirrors in RoomSketch3D?

In the Furnish catalog, not the Build panel. Search mirror, pick one, then tap the wall. It renders at its Mount height in 3D.

How wide should a vanity mirror be?

Match it to the vanity — as wide as the sink base, or the full counter for a double vanity — and center it over the sink.

Can I hang a mirror on the other side of an interior wall?

Yes — select it and tap Out to move it to the other face of the wall.

Sources

Start designing your room

Put this into practice in the floor plan maker: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android