Skip to main content

Bathroom vanity dimensions

Single vanities run 18–48 in wide, double vanities 48–72 in, 18–22 in deep and 32–36 in high. Leave about 30 in clear in front. Sizes, clearances and a worked example in a guest bath.

5 min readUpdated 2026-11-02

Quick answer: a single-sink vanity is 24–48 in wide (30 and 36 in are the most common), a double vanity 48–72 in wide (60 and 72 in are the common sizes), 18–22 in deep and 32–36 in high to the counter. Plan about 30 in of clear floor in front of it (21 in at the very least).

Vanities come in fixed 6-inch widths, so the choice is usually between two sizes that both 'fit' the wall. What decides it is the space left: room in front to stand and open the doors, and space to the toilet or wall beside it. Below are the sizes, a worked example in the Guest Bathroom template, and how to set your vanity's size and look in RoomSketch3D.

In this guide

  1. 1

    Vanity sizes

    VanityWidthDepthCounter height
    Pedestal or console sink18–30 in16–22 in32–36 in
    Small single18–24 in16–20 in32–36 in
    Standard single30–36 in20–22 in32–36 in
    Large single42–48 in21–22 in32–36 in
    Double48–72 in21–22 in32–36 in
    Floating (wall-hung)24–60 in18–20 inmounted to 32–34 in
    Corner24–30 in per side—32–36 in

    Older vanities were 30–32 in high; 'comfort height' 34–36 in is now usual. For an accessible lavatory the 2010 ADA Standards set the front of the rim or counter at 34 in maximum (606.3). A double vanity needs about 30–36 in between the two sink centres so two people can use it at once; under 60 in, a large single sink usually works better.

    Pedestal sink to 72-inch double: the catalog vanities at real size.
  2. 2

    Compare them in 3D

    In 3D each vanity shows its basins, doors and a mirror on the wall above it, so you can see how a 36-inch single compares with a 48-inch double before choosing. The catalog has Vanity 18" to 72" (34 in high), Double Vanity 48", Floating Vanity 36", 48" and 60", Pedestal Sink, Console Sink and Corner Vanity.

    Vanities in 3D, each with its mirror.
  3. 3

    Leave clear floor in front

    - In front of a vanity: 30 in comfortable; about 21 in is the tightest that works. - Sink centre to a side wall: about 15–20 in. - Accessible: a clear floor space of 30 × 48 in in front of the lavatory (ADA 305.3), with knee space under it. Worked example (Guest Bathroom template, 5'1" × 7'11.5" inside): the Vanity 30" (30 × 21 in) stands on the side wall. The tape measure shows 3' 4" (40 in) from its front to the opposite wall, and 2' 9" (33 in) in front of the toilet. Both are comfortable. Smart Flow Check flags a vanity only if it overlaps something or sits in the door's swing, so measure the front clearance yourself.

    40 in in front of the vanity and 33 in in front of the toilet.
  4. 4

    Set the size and the finish

    Select the vanity. Type its W, D and H (34 in is the catalog height), or tap a Quick size. The tabs under the size let you choose the Finish (cabinet colour), Counter Top, Hardware and Doors & Shelves.

    The vanity's panel: size boxes, Quick sizes and finish tabs.
  5. 5

    Check it in 3D

    Open the 3D view to see the vanity with its mirror, the toilet beside it and how the door swings past.

    The Guest Bathroom in 3D.

Tips

Narrow room? Go shallow

An 18-inch-deep vanity instead of a 21-inch one buys 3 in of floor in front, often the difference between tight and comfortable.

A floating vanity shows more floor

It takes the same space but the open floor under it makes a small bathroom look bigger and is easier to clean.

Check the door swing

Bathroom doors often swing over the vanity zone. Flow Check flags anything in the swing; consider a pocket door if it's tight.

Common confusions

A double vanity that's too narrow

Two sinks in 48 in leaves each person about 24 in, elbow to elbow. Below 60 in, one sink and more counter is usually better.

Forgetting the drawers and doors

Vanity doors need about 15–20 in to open. Leave 30 in in front if you can.

Frequently asked questions

What's the standard bathroom vanity size?

Single: 24–48 in wide (30 and 36 in are common), double: 48–72 in (60 and 72 in are common), 18–22 in deep and 32–36 in high.

What's the standard vanity height?

32–36 in to the counter; 34–36 in 'comfort height' is usual today. Accessible lavatories have the rim or counter front at 34 in maximum (ADA 606.3).

How much space do you need in front of a vanity?

About 30 in to stand and open the doors; 21 in at the very least. An accessible clear floor space is 30 × 48 in (ADA 305.3).

What size is a double vanity?

48–72 in wide, 21–22 in deep. 60 in is the smallest that's comfortable for two.

Are vanities in the RoomSketch3D catalog?

Yes, search vanity: Vanity 18" to 72", Double Vanity 48", Floating Vanity 36", 48" and 60", Pedestal Sink, Console Sink and Corner Vanity. Type your own size in its panel if needed.

Sources

Start designing your room

Put this into practice in the bathroom planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android