Fix a black screen, a frozen canvas, a stuck setup screen, or a connection error
Your work is saved before any of these happen — and if the connection drops, it's kept on your device until it can be sent. A reload, a different browser, or a switch between Wi‑Fi and cellular fixes almost all of them — here's which check goes with which symptom, and what each of the app's own messages means.
First, the reassurance: every change you make is written to the cloud as you make it, so none of the situations below cost you work. Reloading the page or restarting the app is always safe. If a change can't reach the cloud — no signal, a dropped Wi‑Fi, an expired sign-in — the app keeps it on your device and keeps retrying, and the next time you open the design it puts it back with the note Recovered unsaved changes from your last session.
Second, the pattern: almost every 'stuck' report is one of four things — a file that couldn't be read (PDF or image), a browser that ran out of graphics memory (frozen canvas or black 3D view), a request that never reached the server (setup screen that won't save, offline cloud icon, expired session), or a network that blocks secure connections (Wi‑Fi with a captive portal, a corporate proxy, an old browser). Find your symptom below.
Step by step
- 1
Check the cloud icon — is your work saving?
The cloud at the right end of the toolbar (on a phone, beside Plan settings) shows the save state at a glance: - Small pulsing grey dot — Changes pending: a save is about to start. - Spinning circle — saving now. - Green cloud — Saved to cloud. - Grey cloud — All changes saved. - Amber cloud with a line through it — Offline – will sync when online. Keep working: changes are held on the device and sent as soon as the connection is back. - Red cloud with a line through it — Save failed – will retry. The app tries again by itself, waiting a little longer each time; if it stays red, reload the page once you're back online. On a phone the cloud fills with green while it saves and turns solid green when it's done; tap it for a short note on how saving works. Wait for green or grey before closing the tab or switching devices.
The amber crossed-out cloud: you're offline, and changes will sync when you're back online. - 2
PDF import shows a black screen or never loads
PDF import renders the page in the browser first. If the preview is black or the spinner never ends: (1) check the file opens in a normal PDF viewer — scanned PDFs saved as images work, password-protected or form-heavy PDFs don't; (2) pick the page — multi-page PDFs ask which page to use; (3) try a screenshot or PNG export of the page instead — the image route accepts PNG/JPG and is identical after import; (4) on iPhone/iPad, share the PDF to Photos as an image first. Very large files are the usual cause (a floor-plan image can be up to 15 MB); a screenshot is a fraction of that.
- 3
The 2D canvas is frozen — pan and zoom don't respond
Almost always the browser tab ran low on memory after a long session or a large import. Reload the tab (your design is saved); if it happens again, close other tabs and any 3D view you had open, and switch to Chrome, Edge, or Safari if you're in a less common browser. On a phone, close and reopen the app. If a specific design freezes every time, email support with its name — we'll look at the file.
- 4
The 3D view is black or won't open
The 3D view needs WebGL. A black view after a long session is the same memory issue as above — reload. If the device frees up graphics memory while the 3D view is open (for example on a phone, when another app needs the memory), RoomSketch3D says so: The 3D view was interrupted — your device freed up memory. Your design is safe; go back and reopen the 3D view. Tap Back to editor and open 3D again. A black view every time means WebGL is off or unsupported: on desktop, update the browser and turn hardware acceleration on in its settings; on an older device try a different browser. Everything else in RoomSketch3D works without 3D.
If the device reclaims graphics memory, the 3D view says so. Tap Back to editor and reopen 3D. - 5
Quick setup won't save ('Failed to save preferences')
The first-run Quick setup (floor naming, measurement system) saves to your account, so it needs a working connection. Tap Save & continue again after a few seconds; if it still fails, switch network (see next step), or sign out and back in. You can also change every one of these later in Settings, so nothing is lost by moving on.
- 6
'Your session has expired'
A red banner at the top of the editor — Your session has expired. Refresh the page and sign in again — new work can't be saved until you do. — means your sign-in ended (you signed out in another tab, cleared cookies, or the sign-in timed out). Tap Refresh page and sign in again with the same method as before. Changes you made while the banner was up are kept in this browser: when the design opens again you'll see Recovered unsaved changes from your last session (next step). Don't keep working for a long time with the banner showing, and don't clear the browser's data before you've signed back in.
Session expired: tap Refresh page and sign in again — work done in the meantime is kept in this browser. - 7
'Recovered unsaved changes from your last session'
This green note appears when you open a design and the app finds changes on this device that hadn't reached the cloud yet — for example because you went offline or your session expired. It has already put them back into the design, and they save like any other change; check the last thing you did is there and close the note with ×. Recovered changes live in the browser you used, so open the design in that same browser (or app) on that same device.
The app found changes that hadn't been saved yet and put them back into the design. - 8
'Secure connection failed' / 'connection is not private' / can't reach the app
This comes from the network, not the app. Test the other network: if you're on Wi‑Fi, turn it off and use cellular — if the app loads, the Wi‑Fi has a captive portal, a proxy, or a content filter blocking HTTPS. Hotel, airport, school, and office networks do this. On a home network, reboot the router and check the device's date and time are automatic (a wrong clock breaks certificates). If both networks fail, check status by opening roomsketch3d.com — if the site loads and the app doesn't, email us.
- 9
What to send support if it's still stuck
Email roomsketch3d@immex.tech with: what you were doing, the device and browser (with version), whether it happens on another network or browser, the design name, and a screenshot of any message. Attach the PDF or image if the problem is an import. That's everything we need to reproduce it. Or report it from inside the app: Support (top right) → Report a bug. Pick the design under Attach a design so we can open exactly what you see, describe what went wrong, tick OK to email me with a follow-up question if you'd like a reply, and add screenshots (up to 20 MB each).
Support → Report a bug: attach the design and screenshots so the problem can be reproduced.
Tips
Wait for the green cloud before you close
Saving takes a second or two after each change. If you're about to close a laptop or hand a tablet to someone else, glance at the cloud first — green or grey means everything is in the cloud.
Same browser, same device to recover
Unsaved changes are held in the browser (or app) where you made them. If you were offline on your phone, reopen the design on that phone first, let it save, then carry on anywhere else.
Report from the design you're stuck in
The in-app Support form can attach the design itself, which is the fastest way for a problem with one plan to be seen and fixed.
Common mistakes
Clearing browser data while changes are waiting
If the cloud is amber or red, unsent changes are stored in the browser. Clearing site data, cookies and storage — or using a private window that you then close — throws them away. Get back online and let the cloud turn green first.
Ignoring the session-expired banner
New work can't reach the cloud until you sign in again. Refresh and sign in as soon as you see it, so only a few minutes of changes need recovering instead of an afternoon's.
Frequently asked questions
Will I lose my design if I reload or close the app while it's frozen?
No. Changes are saved as you make them. A reload reopens the design at its last saved state, which is normally the last thing you did.
Which browsers work best?
Current Chrome, Edge, and Safari on desktop; Safari on iPhone and iPad; Chrome on Android. The 3D view needs WebGL, which all of these have on a device from the last several years.
Does RoomSketch3D work offline?
You can keep editing through a short dropout and the changes queue and sync when you're back, but opening the app, importing files, saving preferences, and the 3D view need a connection.
Is it Wi‑Fi or cellular that's the problem?
Whichever one fails when the other works. Try both. Cellular working and Wi‑Fi failing means that Wi‑Fi network blocks or intercepts secure traffic; the fix is on the network, not the app.
I closed the tab while I was offline. Are those changes gone?
Usually not. They were kept in that browser. Open the same design in the same browser on the same device once you're online: you'll see Recovered unsaved changes from your last session and the changes are back.
What does the red crossed-out cloud mean?
Save failed – will retry: the server didn't accept a save, often because of a brief network hiccup. The app retries on its own. If it stays red, reload the page — your changes are held on the device and are put back when the design reopens.
The welcome screens show a spinning circle and never open. What do I do?
Close the app completely and open it again (in a browser, reload the page). The welcome pages you see after signing in wait for their pictures and short video, and before mid-November 2026 a video that never arrived (a dropped or blocked connection, for example) could leave the first page, often right after Sign in with Apple, spinning for good, even after a reinstall. Now a page whose video is late opens after about 4 seconds with a still picture instead, and a page whose pictures are slow opens after about 10 seconds at most; the Take a look around first. screen works the same way. The fix comes from our servers, so no App Store or Google Play update is needed. Still spinning after reopening? Try the other network (Wi‑Fi or cellular), then email support with your device. More on the welcome pages: first run setup and onboarding.
Start designing your room
Draw it, furnish it, walk through it in 3D — on web, iOS, and Android.
Open RoomSketch3DOne-time purchase · No subscription · Web, iOS & Android