Skip to main content

Kitchen work triangle

The 80-year-old rule that still defines efficient kitchen layout: sink, cooktop and refrigerator form a triangle with each leg 4–9 feet and a total of 12–26 feet (the NKBA guideline, measured from the center-front of each). Comprehensive reference: history, the formula, measured examples on real kitchen templates, when it applies, and modern adaptations for islands and multi-cook kitchens.

10 min readUpdated 2026-11-04

Three appliances anchor any kitchen: refrigerator, sink, and stove (or cooktop). The relationship between these three points defines how the kitchen functions. The 'work triangle' is the imaginary triangle connecting them, and the work-triangle rule (each leg 4–9 feet, the three legs adding up to no more than 26 feet, so 12–26 feet in total) has shaped American kitchen design for about 80 years.

The short answer: measure from the center-front of the sink, the cooktop and the refrigerator. Each of the three legs should be 4 to 9 feet, the total no more than 26 feet, no busy walkway should cut through the triangle, and no leg should cut across an island or peninsula by more than 12 inches. Those are the National Kitchen & Bath Association (NKBA) Kitchen Planning Guidelines, which are design recommendations, not building code: no US building code sets a work triangle.

The idea is usually traced to time-and-motion research on household work (Lillian Gilbreth's kitchen studies of the 1920s) and to kitchen-planning research at the University of Illinois Small Homes Council in the late 1940s. Today the NKBA's guidelines keep the triangle as the starting point for checking a kitchen's efficiency, alongside newer rules for islands, landing areas and kitchens with more than three work centers.

This page is the comprehensive reference for the kitchen work triangle and its modern adaptations, with every leg measured on RoomSketch3D's own kitchen templates. For specific kitchen layout types, see galley kitchen layout, l shape kitchen layout, u shape kitchen layout, one wall kitchen layout, and kitchen island placement. For kitchen counter and island dimensions, see kitchen counter and island dimensions.

In this guide

  1. 1

    History — time-and-motion research and today's NKBA guideline

    The work triangle grew out of time-and-motion thinking about housework. In the 1920s the industrial engineer Lillian Gilbreth studied how many steps a cook took to make a meal and rearranged kitchens so the work moved in a short loop. In the late 1940s, kitchen-planning research at the University of Illinois Small Homes Council (studying small, mass-built houses) turned that idea into planning distances between the three points cooks travel between most: food storage (refrigerator), preparation and cleanup (sink), and cooking (stove or range). Inefficient kitchens forced longer travel; efficient kitchens placed these three points within a compact triangle. The idea spread through planning guides, builders and kitchen designers through the 1950s and beyond, and it lives on today in the NKBA Kitchen Planning Guidelines (the current free edition is written against the 2015 International Residential Code). The 1940s per-leg numbers were tighter than today's; the NKBA now allows 4 to 9 feet on every leg. The rules as the NKBA states them now: - Each leg of the triangle: no less than 4 feet and no more than 9 feet. - Total of the three legs: no more than 26 feet (with three legs of at least 4 feet, the total is 12 to 26 feet). - Where to measure: from the center-front of the sink, the cooking surface and the refrigerator. - Islands: no leg should cut across an island or peninsula by more than 12 inches. - Traffic: no major traffic pattern should cross through the triangle. - Tall obstacles: a full-height, full-depth tall cabinet (a tall oven or pantry cabinet, or the refrigerator itself) shouldn't separate two of the work centers. - More than three work centers: each extra trip to another appliance or work center (a second sink, a wall oven, a microwave) should also be 4 to 9 feet. A rule of thumb many designers add: no leg should be much longer than the others (avoid one long leg and two short ones). Era of dominance. From the postwar years through the 1980s, the work triangle was the standard way to check an American kitchen plan. It fit the kitchens of the time: one cook, a closed-off room, and three big appliances. Modern adaptations. Since the 1990s, the rule has come under challenge from multiple directions: open-plan kitchens that don't enclose the work triangle, kitchen islands that create new vertex configurations, multi-cook households that need multiple work areas, and entertaining kitchens where the cook interacts with guests in adjacent spaces. The NKBA guidelines have been updated to cover these (the 4–9 ft rule for extra work centers, the island rule, landing areas beside each appliance), but the basic triangle concept remains the starting point for kitchen design.

  2. 2

    The classical work triangle — three legs

    The three points: - Sink: where the cook spends the most time during meal preparation. Cleaning vegetables, washing dishes, filling pots, rinsing food. - Stove (or range, or cooktop): where heat is applied to food. The active cooking phase. - Refrigerator: where food is stored cold. Source of ingredients; sometimes the destination after meal prep.

    The three legs (NKBA allows 4 to 9 feet on each; the tighter numbers below are older, commonly quoted targets): - Sink-to-stove (the busiest leg): about 4 to 7 feet. The cook moves between these constantly during meal preparation: filling a pot at the sink, walking to the stove, returning to the sink for vegetables, back to the stove. Shorter is generally better here, down to the 4-foot minimum. - Stove-to-refrigerator: 4 to 9 feet. The cook walks here to retrieve ingredients; not as frequent as sink-to-stove. - Refrigerator-to-sink: about 4 to 7 feet. The cook walks here to wash ingredients from the refrigerator.

    Optimal configuration. - Sink at the apex of the triangle (where it's the central pivot). - Stove and refrigerator on the two legs extending from the sink. - All three appliances visible and reachable from the sink position. - No walking-traffic obstacles within the triangle.

    Total perimeter: - Minimum: 12 feet (4+4+4). Below this, the work centers crowd each other and their landing counters overlap. - Maximum: 26 feet (for example 9+9+8). At this size, walking between appliances becomes inefficient. - Sweet spot: about 18–22 feet. Compact but functional.

    Measured on the L-Shape Kitchen template (center-front to center-front, as the NKBA measures):

    LegTemplate as it opensNKBA range
    Sink → range4' 2"4–9 ft
    Range → refrigerator4' 11"4–9 ft
    Refrigerator → sink8' 6"4–9 ft
    Totalabout 17' 6"12–26 ft

    Every leg passes and the total sits just under the 18–22 ft sweet spot. The template keeps the sink under the window on the short run and puts the range and the refrigerator on the long back run, with a 12-inch base cabinet between the corner and the range so the sink-to-range leg reaches the 4-foot minimum, and a 24-inch base cabinet between the range and the fridge as landing counter for both. The longest leg, refrigerator to sink, is still under 9 feet because the fridge stops one cabinet short of the end of the run.

    Why measuring points matter. Measure from the front center of the sink bowl, the cooktop and the refrigerator door, as the NKBA does. Two appliances that meet at a corner read noticeably farther apart center-to-center than front-to-front, so a leg that looks fine measured from the middle of each cabinet can be under 4 feet at the fronts, where you actually stand.

    The L-Shape Kitchen template as it opens: 4' 1.59" + 4' 11.41" + 8' 5.51" = about 17' 6". Every leg is inside 4–9 ft, measured center-front.
  3. 3

    Move one appliance, then measure again

    Most triangle problems are fixed (or caused) by sliding one appliance one or two cabinet widths, not by redesigning the kitchen, which is why it pays to keep the tape measurements on the plan while you rearrange. Here the L-Shape template's range was swapped with the 12-inch base cabinet beside it, so it sits a foot closer to the corner:

    LegTemplateRange one cabinet closer to the corner
    Sink → range4' 2"3' 4" (under 4 ft)
    Range → refrigerator4' 11"5' 9"
    Refrigerator → sink8' 6"8' 5"

    The move looks harmless on the plan, and Flow Check stays OK, but the sink and the range are now so close that there's no counter between them except the corner cabinet: nowhere to set down a hot pan that isn't also the sink's drying space. The pinned tape caught it instantly. Undo, and the leg is back to 4' 2".

    The same check works the other way: a leg over 9 feet usually gets fixed by sliding the far appliance one cabinet closer, a leg under 4 feet by moving one appliance a cabinet away (and keeping a landing counter between them). The NKBA also asks for at least 15 inches of landing area on the handle side of the refrigerator (or across from it, no more than 48 inches away), so check that a counter still sits beside the fridge after any move.

    How to try it in RoomSketch3D: drag the appliance (on a computer you can also select it and nudge it with the arrow keys: 6 inches per press, 1 inch with Shift), and keep the tape measures pinned. A tape whose ends are locked onto pieces updates as you move them, so you see the new leg length while you drag.

    Same kitchen, range slid 12 inches toward the corner: the sink-to-range leg drops to 3' 4.21", under the 4-foot minimum, even though Flow Check still says OK.
  4. 4

    Why the specific distances

    The 4-foot minimum (each leg): - Below 4 feet, two work centers are so close that their counters overlap: there's nowhere to set down a hot pan next to the range that isn't also the sink's drying space. - The NKBA also asks for landing area beside each work center (24 inches on one side of the sink and 18 on the other; 12 and 15 inches beside a cooktop; 15 inches by the refrigerator). Two centers less than 4 feet apart can't both have their landing space. - Standard cabinet and appliance widths (a 30-inch range, a 33- to 36-inch sink base) set a practical minimum distance between their centers anyway. The 9-foot maximum (each leg): - Above 9 feet, the cook walks significant distances during normal meal prep. - A 9-foot leg means up to 18 feet per round trip (sink → stove → sink), repeated many times over a meal preparation period. - An average adult step is roughly 24–30 inches, so 9 feet is about 4 steps. Manageable; longer gets tiring. The 12-foot minimum (total): - Anything smaller than this means the three appliances are crammed into a very tight space. - Physical interference becomes a problem: doors that clash, no landing space, heat and splashes reaching neighboring work centers. The 26-foot maximum (total): - Beyond this, the kitchen is too spread out for efficient work. - The cook walks a substantial total distance per meal preparation. - For very large kitchens, the triangle is no longer the right model: see multi-zone or multi-cook adaptations below. Why it isn't code. These distances come from how people move while cooking (stride length, how many trips a meal takes), not from safety. That's why the NKBA lists them as recommendations and notes 'state or local codes may apply' rather than giving a code section. Your building department won't inspect your triangle; your knees will.

  5. 5

    Applying the triangle to kitchen layouts

    Different kitchen layouts create different triangle configurations. Galley kitchen. - Two parallel counter runs. - Sink and stove on opposite sides is common; the refrigerator at one end. - The triangle is long and thin, and the leg that crosses the aisle is short. - Aisle width (typically 42–48 inches, the NKBA work aisle for one or more cooks) is the limiting factor. - Total perimeter: 12–18 feet typical. - Measured: the Galley Kitchen template (both runs against their walls, a 41.5-inch aisle, the widest an 8-foot room allows) has legs of 4' 0", 3' 4" and 5' 1", about 12' 5" in total. The sink-to-range leg is under the 4-foot minimum because the two face each other across the aisle. Sliding the range along its run so it isn't directly opposite the sink lengthens that leg, and keeps a second person at the sink out of the cook's way. L-shape kitchen. - Two perpendicular counter runs. - Triangle uses two legs along one wall and one leg along the perpendicular. - Often the most natural fit for the work-triangle concept. - Total perimeter: 15–22 feet typical (the L-Shape template measures about 17' 6", above). U-shape kitchen. - Three counter runs. - Triangle naturally compact: one appliance on each run. - Sometimes 'too tight' with all three appliances on different walls in a small U, or too wide in a big one. - Total perimeter: 12–18 feet typical in a small U; a little more in a big U (19' 0" in the U-Shape template, below). One-wall kitchen. - All appliances on one wall. - Triangle becomes a line. - Distance between farthest appliances is the key measurement. - Total 'perimeter': 8–14 feet (back and forth distance). Island kitchen. - Island typically contains the sink (most common) or cooktop. - Triangle vertices include the island. - Modern adaptation: the cook works at the island, with refrigerator and stove on adjacent walls. For each kitchen type, the work triangle still provides a starting point, but the specific configuration is what matters.

    Galley Kitchen template: 4' 0.26" + 3' 3.62" + 5' 1.05" = about 12' 5". In a narrow galley the sink-to-range leg goes straight across the aisle, so it's shorter than the 4 ft minimum.
  6. 6

    One-wall kitchens — the triangle becomes a line

    When everything is on one wall there's no triangle to draw: the three points sit on a line, and the useful measurement is the distance from one end to the other. Keep that end-to-end run within about 7–9 feet so a round trip stays short, and put the sink in the middle so it's close to both ends. On the One-Wall Kitchen template the fridge-to-sink leg is 3' 3", under the NKBA's 4-foot minimum; that's normal for a compact apartment kitchen with a mini fridge, and the price is a short stretch of landing counter between them. Sink to range is 4' 5", and the full run from fridge to range is 7' 8". The usual upgrade for a one-wall kitchen is an island in front of the run (see one wall kitchen layout): it adds counter and turns the line back into a triangle if the island holds a prep sink or the cooktop. Leave the NKBA's 42-inch work aisle between the run and the island.

    One-Wall Kitchen template: fridge → sink 3' 3", sink → range 4' 5", fridge → range 7' 8". A round trip from fridge to range and back is about 15' 4".
  7. 7

    Modern adaptations — when the triangle doesn't apply

    Several modern kitchen configurations don't fit the classical work-triangle model. Open-plan kitchens. When the kitchen opens to dining and living areas, the cook isn't isolated in a defined kitchen space. The traditional triangle still applies to the appliance arrangement, but additional 'zones' (serving zone, eating zone) extend beyond it. Multi-cook kitchens. Households where multiple people cook simultaneously (cook + sous chef, parents cooking together, home-chef kitchens). The single triangle doesn't work: multiple cooks need multiple work areas. Solution: design 'zones' instead of a single triangle: - Prep zone (large counter near sink and refrigerator). - Cooking zone (stove with adjacent counter). - Cleanup zone (sink with adjacent counter for dishes). The NKBA's version of this: when the plan has more than three work centers, each extra trip to another work center should also be 4 to 9 feet, and work aisles should be 48 inches instead of 42 when more than one person cooks. Measured example. The U-Shape Kitchen with Island template's main triangle is 5' 3" (sink to range, both on the back run), 5' 2" (range to fridge, the fridge on the right-hand run below the oven cabinet) and 8' 7" (fridge to sink), about 19' 0" in total, every leg inside 4–9 ft measured center-front. Adding a 15-inch Prep Sink to the island gives a second cook a triangle of their own: 7' 2" to the range and 4' 10" to the fridge, sharing the range-to-fridge leg, both inside 4–9 ft. (The template's 42-inch aisles suit one cook; with two regulars, 48 inches is the NKBA target.) Entertaining kitchens. Kitchens designed for the cook to interact with guests during meal prep. The cook faces outward (towards the living/dining); the work triangle is behind. Different from the classical model: the cook's orientation is the design priority. Island kitchens. Different from classical because the island is a fourth point (or in some configurations, contains one of the three classical points). Modern variations: - Island contains sink: triangle is sink (island) + stove (wall) + fridge (wall). - Island contains cooktop: triangle is cooktop (island) + sink (wall) + fridge (wall). - Island contains neither: triangle is on the wall counter; island serves as additional prep or seating. Check that no leg cuts across the island by more than 12 inches (NKBA); if one does, the cook has to walk around the island on that trip. Professional kitchens. Different scale entirely: multiple work stations, walk-in coolers, multiple cooks. The classical triangle doesn't apply. Modern NKBA guidance. The current NKBA Kitchen Planning Guidelines include the work triangle (each leg 4–9 feet, total no more than 26 feet) and add rules for kitchens with more than three work centers, islands and traffic. The triangle is treated as a starting point, not a rigid rule.

    U-Shape Kitchen with Island plus a prep sink on the island: the main triangle is 5' 3" + 5' 2" + 8' 7"; the second cook's legs to the range and fridge are 7' 2" and 4' 10", sharing the range-to-fridge leg.
  8. 8

    Common work-triangle mistakes

    Mistake 1: Dishwasher between sink and stove. - Conventional placement: dishwasher next to sink (for plumbing convenience). The NKBA asks for its nearest edge within 36 inches of the sink, with 21 inches of standing space beside its open door. - If placed between sink and stove, its open door blocks the busiest leg of the triangle. - Standard solution: dishwasher to one side of sink; stove on the opposite side of the sink in the workflow. Mistake 2: Refrigerator far from sink. - The cook must walk to the refrigerator to retrieve ingredients, then walk to the sink to wash them. - A 10-foot distance means 20 feet of round-trip walking. - Better: keep refrigerator and sink within 7–9 feet. Mistake 3: Stove against a corner or a tall cabinet. - Corner stoves are problematic: no counter on one side; ventilation challenges. - Better: stove with counter on both sides for staging pots, ingredients, and tools (NKBA: at least 12 inches on one side and 15 on the other). Mistake 4: Triangle around walking traffic. - If a doorway or major walkway passes through the triangle, people walk through the cook's work area. - Bad for safety, bad for efficiency, bad for everyone. - Better: walking traffic routes around the triangle, not through it (the NKBA's 'work triangle traffic' guideline). Mistake 5: Triangle too tight. - Below 12 feet total perimeter: work centers crowd each other and there's no landing space between them. - Better: at least 12 feet total; sweet spot 18–22. Mistake 6: Triangle too spread out. - Above 26 feet total: cook walks excessive distance during meal prep. - Better: keep total under 26. Mistake 7: Ignoring the triangle. - Some modern open kitchens skip the triangle entirely, with appliances placed for looks. - Result: kitchen is hard to use day-to-day. - Better: at minimum, ensure the three appliances are within reasonable distance of each other. Mistake 8: Cooktop under an operable window. - A breeze can blow out a gas flame or push it toward curtains, and reaching over burners to open the window is risky. - The NKBA recommends against placing the cooking surface under an operable window; put the sink under the window instead.

  9. 9

    Designing a kitchen — work-triangle workflow

    Step 1: Identify constraints. - Room dimensions. - Window and door locations (these limit where appliances and sink can go). - Plumbing locations (sink typically near existing plumbing for cost). - Gas line location (stove typically near existing gas line for cost). Step 2: Place sink. - Sink is the most-used work center; place it first. - Typically under a window (for daylight and view while at sink). - On a wall with plumbing access. - Apex of the work triangle. Step 3: Place stove. - 4–7 feet from sink (sweet spot). - On a wall with gas line access (or electric for electric ranges). - With counter on both sides for staging. - Range hood above (or downdraft exhaust). Step 4: Place refrigerator. - 4–9 feet from sink. - 4–9 feet from stove. - Typically at the end of a counter run (not between sink and stove: a full-height fridge between two work centers breaks the counter). - Door swings into the kitchen space, not into adjacent walls, with a landing counter on the handle side. Step 5: Verify the triangle. - Measure each leg from center-front to center-front. - Check total perimeter (12–26 feet). - Check that no major walking traffic crosses the triangle and no leg cuts across an island by more than 12 inches. Step 6: Plan secondary zones. - Prep area (counter space between sink and refrigerator; the NKBA asks for a continuous 36-inch-wide by 24-inch-deep prep area next to the sink). - Cooking storage (cabinets near stove for cookware). - Pantry (food storage). - Cleanup area (dishwasher next to sink). Step 7: Plan for multi-cook adaptations. - Will multiple people cook simultaneously? - If yes, design work zones (prep, cooking, cleanup) that two cooks can work in without crossing paths, keep each extra leg 4–9 feet, and plan 48-inch aisles.

  10. 10

    In RoomSketch3D

    RoomSketch3D doesn't automatically enforce the work triangle, and Flow Check doesn't measure it (or aisle widths). Flow Check looks for pieces that overlap each other or a wall, furniture in a door's swing or in the 36 inches in front of a doorway, tall pieces in front of a window, recliners that can't recline, and a coffee table closer than 18 inches to its sofa. A kitchen with a 30-foot triangle and 24-inch aisles can still show Flow check OK, and so can a triangle with a leg under 4 feet, like the range-moved L-Shape example above (a 3' 4" sink-to-range leg). Verify the triangle yourself after placing appliances: To verify the work triangle: 1. Place sink, stove, and refrigerator in the kitchen (or start from a kitchen template). 2. Open the Tape measure in the toolbar (it starts in Length mode). Drag one end onto the front center of the sink and the other onto the front center of the range. Each end can lock onto a piece (a padlock shows), so the reading updates as you move it. 3. Tap the pin on the reading (Keep this measurement) so the line stays on the plan, then measure range → refrigerator and refrigerator → sink the same way. 4. Verify each leg is 4–9 feet and the three readings add up to 12–26 feet. 5. Move an appliance and watch the pinned readings update. Saved tape lines can be shown or hidden with Tape measurements in Layers. Kitchen layout templates in RoomSketch3D include work-triangle-friendly configurations (all measured on this page). Every template opens with Flow check OK, and the L-Shape and U-Shape keep every leg between 4 and 9 feet measured center-front; measure your own changes the same way: - L-Shape Kitchen (add an island from Furnish → Kitchen → Islands & Carts if the room allows). - Galley Kitchen. - U-Shape Kitchen with Island. - One-Wall Kitchen. Load a template, then customize dimensions and appliance positions to match your space. Measure the aisles too. Flow Check doesn't measure aisle widths either: aim for 42 inches between counter fronts for one cook and 48 inches for two (NKBA), and measure them with the same tape. Then open 3D View (tick Dollhouse to look in over the walls) to see whether the layout feels right.

    The L-Shape Kitchen template in Dollhouse 3D: sink under the window on the left run, range and refrigerator on the back run.

Tips

Sink at the apex

You spend the most time at the sink. Face the stove and refrigerator from there. Most efficient.

Measure center-front to center-front

The NKBA measures each leg from the center of the front of the sink, cooktop and refrigerator, not from the back wall or the appliance's corner. Measuring the wrong points can make a good triangle look 2 feet too long.

Don't put dishwasher between sink and stove

It interrupts the natural flow between two of the most-used appliances. Dishwasher beside sink (matters for plumbing too) and stove on the other side.

Plan walking traffic around the triangle

If a doorway or major walkway crosses the triangle, people walk through your work area. Bad for safety and efficiency. Route traffic around the triangle.

Modern adaptation: design 'zones' for multi-cook kitchens

If multiple people cook simultaneously, the single triangle doesn't work. Design separate work zones (prep, cooking, cleanup) that two cooks can use without conflict. A prep sink on the island is the classic way to give the second cook a short triangle of their own.

Counter on both sides of the stove

Staging pots, ingredients, and tools requires counter space: at least 12 inches on one side and 15 on the other (NKBA). Stove against a corner with counter on only one side is awkward.

Pin your tape measures before you rearrange

Pinned tape lines whose ends are locked onto the sink, range and fridge update live as you drag an appliance, so you can try three positions in a minute and keep the one where all three legs land between 4 and 9 feet.

Common confusions

Triangle too tight (under 12 feet total)

Work centers crowd each other: there's no landing space between them and doors clash. Worth more space.

Triangle too spread (over 26 feet)

Excessive walking between appliances during meal prep. Worth re-arranging.

Walking traffic through the triangle

People walking through the cook's work area. Reroute walking traffic around the triangle.

Checking only the total

A 24-foot total can hide an 11-foot leg, as in the L-Shape template above. Check every leg against 4–9 feet, not just the sum.

Calling the triangle 'code'

No US building code requires a work triangle. The 4–9 ft and 26 ft numbers are NKBA planning guidelines; codes cover things like ventilation, outlets and clearances above the cooktop.

Frequently asked questions

What is the kitchen work triangle?

The imaginary triangle formed by sink, stove, and refrigerator. Each leg should be 4–9 feet; total perimeter 12–26 feet (no more than 26, per the NKBA). Defines efficient kitchen layout: the cook moves between these three points constantly during meal preparation.

Does the work triangle still apply to modern kitchens?

Yes, with modifications. Modern kitchens often add islands that contain one vertex (e.g., island sink). For multiple cooks, plan two triangles or work-zone approaches (prep zone, cooking zone, cleanup zone) instead. The triangle is a starting point, not a rigid rule.

Where should the sink go in a kitchen?

The sink is typically the apex of the work triangle, the central pivot point where the cook spends the most time. Often placed under a window for daylight and view; on a wall with plumbing access for cost-effective installation. If the kitchen has only one sink, the NKBA suggests placing it next to or across from the cooking surface and refrigerator.

What's the optimal distance between sink and stove?

About 4–7 feet. This is the busiest leg of the work triangle. Shorter than 4 feet leaves no landing counter between them; longer than 7 feet adds walking between the two most-used work centers (the NKBA's outer limit for any leg is 9 feet).

How do I plan a kitchen for multiple cooks?

Design work zones instead of a single triangle. Prep zone (counter near sink and refrigerator), cooking zone (stove with adjacent counter), cleanup zone (sink with adjacent dishwasher). Two cooks can work in different zones simultaneously. Keep each extra leg 4–9 feet and widen work aisles to 48 inches.

Should the work triangle be perfect — all three legs equal?

No, equal legs aren't required. What matters is that no leg is significantly longer than the others (avoid one long leg and two short ones) and that total perimeter stays within 12–26 feet.

Where do I measure the work triangle from?

From the center-front of each work center: the middle of the sink's front edge, the middle of the range or cooktop front, and the middle of the refrigerator door. That's how the NKBA defines the legs.

Is the work triangle a building code requirement?

No. It's a planning guideline from the National Kitchen & Bath Association. Building codes regulate other kitchen items (ventilation, electrical outlets, clearance above the cooktop), and local codes vary, so check with your building department for those.

Does RoomSketch3D check my work triangle?

Not automatically. Flow Check catches overlaps, blocked doors and doorways, tall pieces at windows, recliner clearance and coffee-table distance, but not the triangle or aisle widths. Use the Tape measure, pin each leg, and read the three lengths.

Sources

  • NKBA Kitchen Planning Guidelines with Access Standards (National Kitchen & Bath Association, free edition based on the 2015 IRC) — Distance between work centers: the three legs total no more than 26 ft, no leg under 4 ft or over 9 ft, each measured from the center-front of the appliance/sink; extra work centers 4–9 ft; no leg crosses an island or peninsula by more than 12 in; no major traffic through the triangle; a full-height tall cabinet shouldn't separate two work centers. Work aisle 42 in (one cook) / 48 in (multiple cooks); walkway 36 in. Landing areas: sink 24 in and 18 in; cooktop 12 in and 15 in; refrigerator 15 in. Dishwasher within 36 in of the sink with 21 in standing space. Cooking surface not under an operable window.

Start designing your room

Put this into practice in the kitchen planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android