Skip to main content

Kitchen counter and island dimensions

Counters are 36 in high and about 25 in deep. Islands start around 36 × 24 in and run to 96 × 42 in or more. The aisle around an island matters most: about 42 in for one cook, 48 in for two.

6 min readUpdated 2026-11-02

Quick answer: a standard kitchen counter is 36 in (91 cm) high and 25–26 in deep (a 24-inch base cabinet plus the countertop overhang). A kitchen island is typically 48–96 in long and 24–42 in deep, and needs an aisle of about 42 in on every working side (48 in where two people cook).

Kitchen parts come in fixed sizes, so planning a kitchen is mostly planning the gaps: the aisle between the counters and the island, the overhang where stools tuck in, and the walkway past the seats. Here are the numbers, a worked example with the U-Shape Kitchen with Island template, and how to check your own kitchen.

In this guide

  1. 1

    Counter and cabinet sizes

    PartStandard size
    Counter height36 in (34½ in cabinet + 1½ in top)
    Counter depth25–26 in
    Base cabinet24 in deep, 34½ in high, 9–48 in wide in 3-inch steps
    Wall cabinet12 in deep, 30, 36 or 42 in high
    Gap between counter and wall cabinets18 in (15–20)
    Tall pantry or oven cabinet24 in deep, 84–96 in high
    Bar-height counter42 in

    The catalog uses these sizes: Base Cabinet 12" to 36" (24 × 34½ in), Wall Cabinet 30 and 42 in tall and 12 in deep, Pantry 18", 24" and 36" at 84 in tall, and Oven Cabinet 30 × 24 × 84 in.

  2. 2

    Island sizes

    IslandSizeSeats
    Cart30 × 18 in to 42 × 24 in—
    Small36 × 24 in to 48 × 30 in1–2 on one side
    Medium60–72 × 36 in2–3
    Large84–96 × 42 in3–4, or seating on two sides
    With a sink or cooktop72+ × 36–42 inwith 12–15 in of landing each side

    For seating, add 12–15 in of overhang at a 36-inch counter (more knee room for a 30-inch table height, less at a 42-inch bar) and allow 24 in of length per stool. The catalog has Kitchen Cart 30 × 18 in, Small Island 36 × 24, Standard Island 48 × 30, Large Island 72 × 36, XL Island 96 × 42, Island w/ Sink & Appliance Bays 72 × 27, L-Shaped Island 84 × 72, and Island + 3 Stools (72 × 54) and Island + 4 Stools (96 × 54).

    Cart, small, standard, large and XL islands, plus an island with three stools.
  3. 3

    The aisle is what matters

    Kitchen designers' common guideline is a 42-inch work aisle for one cook and 48 in for two, and 36 in for a walkway that isn't a work zone. Every inch of island you add comes out of those aisles. Too big: in the U-Shape Kitchen with Island template (14 × 16 ft), swapping the Small Island for a 72 × 36 in Large Island leaves just 2' (24 in) to the sink run and 1' 11.6" to the pantry side. Nobody could open the dishwasher and pass. Smart Flow Check doesn't measure aisles (nothing overlaps, so it still says All good!), which is why the tape measure is the check here.

    A 72 × 36 in island leaves 24-inch aisles: far too tight.
  4. 4

    Right-size the island

    With the template's Small Island (36 × 24 in) the tape measure reads 3' 6" (42 in) on the sink side and 3' 5.6" on the pantry side: right on the one-cook guideline. Two stools sit on the open side, with 5' 10" from the island to the wall there, room for the stools and a walkway behind them. Worked example: a kitchen 168 in wide inside with 24-inch-deep counters on both sides has 168 − 24 − 24 = 120 in between the counters. Two 42-inch aisles use 84 in, so the island can be at most 36 in deep; for two 48-inch aisles it's 24 in.

    The template's 36 × 24 in island keeps 42-inch aisles.
  5. 5

    Set the island's size and finish

    Select the island. Type its W, D and H (36 in for counter height, 42 in for a bar-height island), or tap a Quick size. Pick the Countertop and Cabinet finish in the same panel. Then re-measure the aisles.

    The island's panel: W, D, H, Quick sizes, Countertop and Cabinet finish.
  6. 6

    See it in 3D

    In 3D you can check the island against the range, sink and fridge, and whether the stools have room behind them.

    The U-shaped kitchen with island in 3D.

Tips

Measure counter edge to island edge

Aisles are measured from the front of the countertop (not the cabinet) to the island's top. Measure where the counters overhang.

Open appliances need the aisle too

An open dishwasher door reaches about 24–27 in into the aisle and an oven door about 20–24 in. A 42-inch aisle leaves room to stand beside them.

No room for an island? Try a cart

A 30 × 18 in Kitchen Cart gives prep space where a fixed island would choke the aisles.

Common confusions

Sizing the island to the room, not the aisles

Subtract the aisles first: room width − counters − 2 × aisle = the island depth you can afford.

No overhang for stools

Without 12–15 in of overhang, people sit sideways or bang knees on the cabinet doors.

Frequently asked questions

What's the standard kitchen counter height?

36 in (91 cm), with a counter depth of 25–26 in. Bar-height counters are 42 in.

What's a standard kitchen island size?

About 48–96 in long and 24–42 in deep. A 36 × 24 in island is a small one; 72 × 36 in seats three.

How much space do you need around a kitchen island?

About 42 in for one cook and 48 in for two on working sides; 36 in for a side that's only a walkway. Measure it with the tape measure.

How much overhang does an island need for stools?

12–15 in at a 36-inch counter, with about 24 in of length per stool.

Does RoomSketch3D check the aisle around an island?

Not the aisle width: measure it with the tape measure. Smart Flow Check flags anything that overlaps the island or sits in a door's swing or approach.

Sources

Start designing your room

Put this into practice in the kitchen planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android