Skip to main content

Garage layout

Plan about 3 feet beside each car to open the doors, 3 to 4 feet between two cars, and 4 feet or more in front for a workbench. A 24 × 24 foot garage parks two cars with a workshop wall.

7 min readUpdated 2026-11-02

A garage layout is mostly about the space around the cars: enough beside each one to open a door and get out with a bag, enough in front to walk past to the workbench, and enough at the house door to step in safely. Those are planning guidelines, not code; the code part is the door into the house (IRC R302.5.1).

Below, a 24 × 24 two-car garage is laid out with a sedan, an SUV and a workbench wall, and a 12 × 22 one-car garage shows the tight version. All the cars are real-size pieces from the catalog.

In this guide

  1. 1

    Car sizes and the space around them

    Catalog sizes (width × length): Compact Car 68" × 165", Sedan 74" × 186", SUV 78" × 190", Pickup Truck 80" × 230". Mirrors add a few inches. Common planning numbers: - Beside a car: about 30–36" to open a door and get out. - Between two cars: 36–48" so both front doors can open. - In front of the cars: 36" to walk past; 48" or more to use a workbench. - Behind: the garage door closes over the car with a few inches to spare; check the car length against the inside depth.

  2. 2

    Two cars in a 24 × 24

    In a 24 × 24 foot garage (23' 6" inside) with a 16-foot door: - Between the sedan and the SUV: 4' 4". - Sedan to the side wall: 2' 8" (tight for the driver's door; the house door is on that side, above the car). - Workbench to the car noses: 4' 11", room to stand at the 8-foot bench. Shelving goes in the corner beside the bench and a tall cabinet on the far wall, both clear of the cars. Flow check is OK.

    24 × 24: 4' 4" between the cars and 4' 11" in front of the workbench.
  3. 3

    One car in a 12 × 22

    A 12 × 22 one-car garage (11' 6" × 21' 6" inside) with a 9-foot door fits a compact car with 2' 11" on each side, a 6-foot workbench at the front and a 5-tier shelf on the side wall. A sedan would leave about 2' 8" each side; a pickup truck won't fit the depth. For more storage, go up: overhead racks and wall cabinets keep the floor free for the car doors.

    12 × 22: a compact car with 2' 11" each side.
  4. 4

    The door into the house

    The IRC (R302.5.1) doesn't allow any opening from a garage directly into a sleeping room. Other doors between the garage and the house must be solid wood or solid/honeycomb-core steel at least 1-3/8 inches thick, or a 20-minute fire-rated door, and self-latching with a self-closing or automatic-closing device. Local codes vary; check with your building department. Leave a landing at that door so nobody steps down straight into a car's path.

  5. 5

    Build it in RoomSketch3D

    Attached garage: add it off the house with Build → Add Room — tap the outside wall it shares, then drag its corners to the real size (see add a room). Detached garage: use Build → Detached unit (ground floor only) — tap the outside wall of the house it faces, then drag it into place; drag a corner or tap a value to type its exact size (see detached garage adu shed). For a garage-only plan, just draw the garage as the room. Then add the garage door from the Build panel (Doors & Windows → Garage Door). In the furniture panel the Garage group holds vehicles, Workbenches, Shop Tools, Tool Storage and garage shelving. Keep tape measurements beside and between the cars. Smart Flow Check flags pieces that overlap each other or a wall, anything in a door's swing, anything inside the 36-inch approach zone in front of a door or opening, tall pieces in front of a window, recliners that can't recline, and a coffee table too close to the sofa. It does not measure aisles, work-triangle legs or code clearances, so check those with the tape measure.

    The two-car garage in 3D, Dollhouse on.
  6. 6

    Setting up a workshop: the Shop Tools section

    The Garage group has a Shop Tools section with 26 machines and tools at their real size — Cabinet and Jobsite Table Saws, Miter Saw and Miter Saw Station, Floor and Benchtop Drill Presses, Band Saw, Router Table, Jointer, Benchtop Planer, Wood Lathe, Scroll Saw, Belt & Disc Sander, Bench Grinder, Bench Vise, Air Compressor, Dust Collector, Shop Vac, Welder on Cart, Sawhorse Pair, Step Ladder, Rolling Shop Stool, Wall Lumber Rack, Clamp Rack, Anvil on Stand and Engine Hoist. Benchtop tools sit on top of a workbench or tool cabinet in 3D. Search workshop, woodworking or shed to find them all. A table saw needs infeed and outfeed room the length of your longest board on each side; plan it on the long axis of the garage. Step by step with screenshots: plan a workshop with shop tools.

Tips

Measure your actual cars

Mirror to mirror and bumper to bumper, then compare with the inside of the garage, not the outside walls.

Bench on the front wall

The wall the car noses face is the natural workshop wall; the space in front of the bumpers is otherwise wasted.

Mark the steps

If the house door is up a step or two, those steps eat garage floor. Draw them so you don't park into them.

Common confusions

Shelving on the driver's side

18–24" deep shelves beside a car leave too little room to open the door. Put deep storage at the front or overhead.

A two-car garage under 20 feet wide

Two average cars are about 13 feet wide together; at 20 feet that leaves only about 7 feet for three gaps.

Frequently asked questions

What's the standard two-car garage size?

Common sizes run from about 20 × 20 (tight) to 24 × 24 (comfortable, room for a bench). These are typical sizes, not code.

How much space between two cars in a garage?

About 36–48 inches so both front doors can open.

Can I put a table saw, drill press or dust collector in my garage plan?

Yes. In the furniture panel open the Garage group → Shop Tools, or search the tool's name or workshop. There are 26 real-size shop tools; see workshop shop tools.

What kind of door between the garage and the house?

Under IRC R302.5.1: solid wood or steel at least 1-3/8" thick, or 20-minute fire-rated, and self-latching with a self-closing device. Never directly into a bedroom.

Sources

  • International Residential Code (IRC) 2021, R302.5.1 — No openings from a private garage directly into a sleeping room; other doors must be solid wood or solid/honeycomb-core steel not less than 1-3/8" thick, or 20-minute fire-rated, and self-latching with a self-closing or automatic-closing device.

Start designing your room

Put this into practice in the room planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android