Skip to main content

The getting-started checklist — your first four steps

Tap a step and a Tap here pointer leads you to the right button; steps tick themselves off, and the Support menu (the ? on a phone) brings the checklist back any time.

4 minUpdated 2026-10-28

The first minute in any design app is the hardest. RoomSketch3D puts a small checklist on your first plan — Your first plan — with the four things that turn an empty rectangle into a room: Add a door, Add a window, Add furniture, See it in 3D. Tap a step and the app points at the actual button, so you learn where things live rather than following instructions on another page.

The four steps are chosen because each one teaches a pattern you'll reuse for everything else. Door and window teach the tool, then tap a wall pattern that every wall feature uses (openings, sliding doors, fireplaces, outlets and switches). Furniture teaches the pick, then Add, then drag pattern of the catalog. And 3D teaches that the plan and the 3D view are the same design — change one and the other follows. On a computer the panel's footer says it plainly: Later, find all of these in the side panels.

It takes about two minutes. Below is each step, what to check as you do it, and where to go once the checklist says Nice work!

Step by step

  1. 1

    Find the checklist

    It appears automatically right after you create your first room. Hid it, or it didn't show? Open Support in the top bar (on a phone it's the ? button) and choose Getting-started checklist (Add a door, a window, furniture, and see it in 3D). The panel shows 0 of 4 done.

    Your first plan — four steps.
  2. 2

    Add a door

    Tap the step. A pulsing Tap Door pointer highlights the Door tool in the Build panel (Structural & Interior on a phone). Tap it, and the banner says Door: tap a wall to place it — tap a wall and the door goes in. The step ticks itself off.

    The pointer leads to the real button.
  3. 3

    Add a window

    Same again: the pointer finds the Window tool, you tap a wall, the step completes.

    Steps tick themselves off.
  4. 4

    Add furniture

    The hint reads Pick any item, then tap Add. Choose anything in the catalog — search sofa — tap +Add, and it lands in the room ready to drag.

    Pick any item, then tap Add.
  5. 5

    See it in 3D

    The last step opens the 3D view — Walk through your room. When all four are done the panel says Nice work! You know the basics. Everything else lives in the same places. Collapse the checklist with its header button, or hide it with × (Hide this checklist).

    Four steps, one room.

Tips

Let it point

Even if you know where Door is, tapping the step shows you the banner flow — tool, then wall — that every structural item uses.

Then take the tour

Guided tour in the Support menu (the ? on a phone) walks the whole editor on a sample apartment when you're ready for more.

Put the door where your real door is

The checklist accepts any wall, but your plan is more useful if the door goes on the right wall at the right spot. Tap the door afterwards to set its width, its distance from the corner and its hinge side.

Next: measure and check

After the four steps, set each wall's real length (tap a wall and type it), then watch the Flow check pill at the top left: it turns red when a door is blocked or pieces overlap. See accurate floor plan checklist.

Common mistakes

Hiding it by accident

Hiding (or finishing) the checklist turns it off for your account, so it won't pop up again on any device, even on a new plan. It isn't gone: open it any time from Support (the ? on a phone) → Getting-started checklist.

Placing furniture before the walls are right

It's tempting to keep furnishing after the checklist. Set the real wall lengths first; resizing walls later moves the room around pieces you've already arranged.

Frequently asked questions

The checklist didn't appear. How do I open it?

Open Support in the editor's top bar (the ? on a phone) and choose Getting-started checklist. It appears by itself only until you hide or finish it once; after that it's off for your account on every device, and the Support menu is the way back.

Can I skip steps?

Yes. Steps are independent; do them in any order or ignore the panel — it only guides.

Where do these tools live afterwards?

Exactly where the pointer showed you: doors and windows in the Build panel, furniture in the catalog, 3D in the view buttons.

Does the checklist change my plan?

Only by what you add: the door, window and furniture you place are normal parts of your design. Undo (Ctrl+Z, or the arrow in the toolbar) removes them like anything else.

I started from a template. Will I see the checklist?

The checklist is for your first plan. On any plan you can open it from Support → Getting-started checklist. It reads the plan itself, so a template that already has doors, windows and furniture shows those steps ticked; See it in 3D ticks once you open the 3D view.

Start designing your room

Put this into practice in the floor planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android