Design a home gym corner — cardio, weights, and a stretch zone in eight by ten
A home gym is six pieces and eighty square feet: a rubber stall mat so the floor survives, a treadmill for the cardio days, a dumbbell rack with the weights facing you, a flat bench with room to lift, a yoga mat for the stretch, and a vertical stand for the pairs you actually use. Every piece is in the RoomSketch3D catalog — search the names, place them in your own room, and check the clearances in 3D.
Watch it
Design a home gym corner in 40 seconds
Every piece at its true size, clearances checked, then a walk around it in 3D. The list, sizes, and steps are below.
A home gym isn't a membership — it's a corner with a floor that can take it. The whole thing fits in eight by ten feet: a stall mat to protect what's under the iron, one cardio machine, the dumbbells racked where you can see them, a bench with lifting room around it, and a strip of floor that belongs to stretching.
Every piece below is in the RoomSketch3D catalog — search the exact names in the Furnish panel, place them in your own room, and walk the clearances in 3D before anything heavy comes through the door.
Or let the app place it: tap the Auto-furnish wand in the toolbar, drag a box over the area you want to use, type Gym Corner in the search box and pick its card. Every piece lands against your walls, with a Fits or Tight badge for the space you drew — then edit anything. More in Auto-furnish.
What you'll need
- •Rubber Stall Mat (6×8) (72″ × 96″) — the floor protection everything stands on
- •Treadmill (36″ × 80″)
- •Dumbbell Rack (3-Tier) (60″ × 24″) — weights facing the room
- •Flat Bench (14″ × 48″)
- •Yoga Mat (24″ × 68″) — the stretch zone
- •Vertical Dumbbell Stand (24″ × 24″)
- •An 8×10 ft corner — garage bay, basement end, or spare-room wall
Step by step
- 1
Lay the stall mat first
Search Rubber Stall Mat (6×8) and place it in the corner you're claiming — it's the gym's footprint, and every dropped dumbbell lands on rubber instead of the floor. Mats underlay, so the equipment drops right on top.
The whole gym on the plan — six pieces on and around a 6×8 stall mat. - 2
Rack on the far edge, weights facing you
Search Dumbbell Rack (3-Tier) (60″ wide) and set it along the far edge of the mat, rotated so the dumbbells face the room. Weights you can see are weights you use; weights facing the wall are shelving.
- 3
Treadmill down the left
Search Treadmill (36″ × 80″) and run it down the left side of the mat, belt pointing into the room. Keep 24 inches clear at the back — the dismount zone is a safety rule, not a suggestion.
- 4
Bench center-right, stand in the corner
Search Flat Bench and place it center-right with open floor on both sides — that air is where the presses and rows happen. Then search Vertical Dumbbell Stand for the bottom-right corner: the two pairs you use every session, one step from the bench.
- 5
Yoga mat across the bottom, then check it in 3D
Search Yoga Mat and lay it across the bottom of the stall mat — a full-length stretch zone that no machine is allowed to creep into. Switch to 3D and orbit the corner: dismount room behind the treadmill, lifting air around the bench, every dumbbell reachable without stepping over anything.
The finished corner in 3D — cardio, iron, and a stretch zone that stays clear. - 6
Or let Auto-furnish place the Gym Corner for you
Everything above can also be done in one go. Open your plan, tap the Auto-furnish wand in the toolbar and drag a box over the spot, tracing the walls you want the pieces against — at least 8 × 10 ft for this layout. In the Ideas list, type Gym Corner in the search box and pick its card; if it isn't among the first six cards, tap Show more. A Fits badge means the layout fits the box you drew, Tight means it is up to about 12% too big and a piece may sit a little past an edge. The six pieces land against your walls, and Variation 1–5 offer other arrangements — mirrored, turned to another wall or corner, or with a piece swapped for a similar one; where it can, it skips arrangements that would land on furniture already in your plan. If the plan still looks empty after you pick the card, tap Variation 2 (or any other variation) and the pieces appear — a known glitch can leave the first variation undrawn. Tap View in 3D to check it, then Done: the whole placement is one undo step, and every piece stays editable. More in Auto-furnish.
Drawn over the top-left corner of a plain 12×14 ft room, the Gym Corner lands in a few taps — six pieces, a choice of variations, every piece still editable.
Tips
The stall mat is the most important piece
It protects the floor from the iron, kills the treadmill's hum, and draws the gym's border so equipment doesn't sprawl. If you upgrade only one thing, upgrade what's under everything else.
Swap the cardio piece to fit the space
When the corner is shared space, the Folding Treadmill tips up against the wall between runs. A Spin Bike takes about half the treadmill's footprint and gives the bench more lifting room.
The bench needs air, not just floor
A flat bench is 14 inches wide because your elbows, not the pad, define its real footprint — leave clear space on both sides and above. Check it in 3D from a low angle before you commit the layout.
Common mistakes
Iron on a bare floor
One dropped dumbbell on tile or hardwood is a repair bill bigger than the mat. Lay the stall mat first and keep every weight on it — that's why it's step one.
No dismount zone behind the treadmill
The belt keeps moving; you sometimes don't. Keep 24 inches clear behind the deck and check it with the Tape measure — Flow Check only flags pieces that overlap the treadmill, not ones parked behind it.
Machines eating the stretch zone
The yoga mat's strip of floor is the easiest space to sacrifice and the one you'll miss every session. If a swap or a bigger machine lands on it, the corner needs to grow — not the stretch zone shrink.
Frequently asked questions
How much space does a home gym corner need?
About 8 × 10 feet for this full six-piece version, with the 6×8 stall mat as its core. Swap the treadmill for the Spin Bike and the same kit fits closer to 7 × 9.
What equipment makes up a home gym corner?
Six catalog pieces: Rubber Stall Mat (6×8), Treadmill, Dumbbell Rack (3-Tier), Flat Bench, Yoga Mat, and a Vertical Dumbbell Stand. Search each name in the Furnish panel.
Can I swap pieces?
Yes — that's the point of planning it. Try the Folding Treadmill when the corner doubles as living space, or the Spin Bike at half the footprint. The layout logic stays the same: cardio down one side, weights racked facing you, lifting air around the bench, stretch zone kept clear.
Start designing your room
Put this into practice in the 3D room planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.
Open RoomSketch3DOne-time purchase · No subscription · Web, iOS & Android