Type the angle between two walls
Tap an outside wall and the angle at each of its two corners shows with a pencil. Tap one, type the angle you measured (93°, say), choose which wall turns (Joined wall, the one across the corner, is picked to start with; This wall turns the one you tapped; the turning wall is marked on the plan) and tap ✓. The turning wall pivots on that corner to exactly that angle while the wall at its far end gets longer or shorter, so the rest of the room keeps its shape. While you draw walls, every length and angle stays editable too.
Real rooms are rarely perfectly square. Older houses settle, additions meet the original house at 92° instead of 90°, a hallway wall is set at 135° to make an entrance, and a corner window bay turns at 45°. If you've measured that one side wall meets the front wall at 93°, you can now type exactly that: tap the outside wall, tap the angle at its corner, type 93 and tap ✓.
A corner has two walls, so the box asks Which wall turns: the Joined wall (the wall on the other side of that corner, picked to start with) or This wall (the one you tapped). The wall that will turn is marked on the plan while you type. It pivots on the corner to the angle you typed, and the wall at its other end simply gets longer or shorter so the rest of your plan keeps its shape. Every other angle in the room stays as it was, except the one at the turning wall's far end, which changes by the same amount the other way. Undo takes it back in one step.
The same angle boxes appear while you draw with the Exterior Wall tool: every wall's length and every corner's angle stays on screen and editable until you finish, and a wall you start from your plan shows its angle to the walls on both sides. Below: how to type an angle on a finished plan, how to choose which wall turns, what moves and what doesn't, sides drawn in two pieces, typing angles while drawing, squaring up a crooked corner, what stops an angle, and how to measure the real angle of a corner in your home.
What you'll need
- •A design open in the editor, on a computer, tablet or phone
Step by step
- 1
Tap an outside wall to see the angle at its corners
Tap any outside wall. It turns blue, its bar (length, padlock, link, curve, scissors, trash) appears beside it, and at each of its two corners the angle between it and the next wall shows in a small pill with a pencil. Square corners show 90° in green with the right-angle mark; any other angle shows in blue with an arc. The number is the inside angle, measured on the room side, the same number View & Layers → Show corner angles shows for every corner at once. So the inside corner of an L-shaped plan reads 270°, and a corner that leans in slightly reads something like 87°. On a phone or tablet the pills look and work the same; tap one to edit it.
Tap an outside wall: the angle at each of its corners shows, with a pencil to edit it. - 2
Tap the angle, type the new one, tap ✓
Tap the angle pill at the corner you want to change. It turns into a degrees box with a green ✓ and a grey ✕, and under it Which wall turns with two buttons, Joined wall and This wall (more on those in the next step). The box opens with the current angle already selected, so just type the angle you measured, for example 93, and it replaces the old number. While you type, the wall's length bar, its end handles and the other corner's angle step out of the way, and on a phone the box stays fully on screen. You can type decimals too (92.5); a comma works as the decimal point. Tap ✓ (or press Enter on a computer) to apply it. Tapping elsewhere, or the phone keyboard's Done, also applies what you typed. ✕ or Esc leaves the corner as it was. Any angle from 1° to 359° can be typed. Above 180° makes that corner an inside (reflex) corner, as at the inner corner of an L.
The degrees box: type the angle, pick Joined wall or This wall, tap ✓. - 3
Choose which wall turns: Joined wall (the start) or This wall
Every corner is shared by two walls, and only one of them turns. Under the degrees box, Which wall turns offers: - Joined wall (picked each time a box opens): the wall on the other side of the corner turns. The wall you tapped stays exactly where it is. - This wall: the wall you tapped turns, and the joined wall stays where it is. While the box is open, the wall that will turn is marked on the plan with a white dashed line down its middle, so you can see which one will move before you tap ✓. Switching the choice keeps the number you typed. A simple way to decide: tap the wall you trust (the one you measured, the front wall, a wall shared with the rest of the house) and keep Joined wall, so the trusted wall can't move. If you tapped the wall that's actually wrong, pick This wall. In the picture the top wall of the Cozy Living Room template is selected and its 135° corner with the 45° cut wall is open. With Joined wall picked, the dashes are on the cut wall.
Joined wall: the wall across the corner (dashed) turns; the selected top wall stays put. - 4
This wall: the wall you tapped turns instead
Tap This wall and the dashes jump to the wall you selected: now it's the one that will pivot on the corner, and the joined wall stays put. The choice applies to this one typed angle; the next time you open a degrees box it starts on Joined wall again, so glance at the dashes before you tap ✓. The choice also decides which other walls change length. The turning wall's far end slides along the wall beyond it: that wall keeps its direction and just gets longer or shorter. Everything else keeps its position and angle.
This wall: the selected top wall (dashed) turns; the cut wall stays put. - 5
What moves with Joined wall
With Joined wall, the joined wall turns around the corner you typed at, so that corner becomes exactly the angle you typed. The wall you selected doesn't move at all. The joined wall's other end slides along the wall beyond it: that far wall keeps its direction and just gets longer or shorter, and the joined wall's own length changes as needed.
On the Cozy Living Room template (top wall selected, typing 150° at its corner with the 45° cut wall):
Before After (Joined wall) Corner typed at 135° 150° Top wall (selected) doesn't move doesn't move Cut wall (turned) 4′ 10.2″ 4′ 0.07″ Right wall (far wall) 13′ 1.35″ 14′ 6.47″ Top-left corner 90° 90° Gross area 235 sq ft 237 sq ft The corner at the cut wall's other end closes by the same 15° (135° → 120°), because the corners of a five-sided room always add up to 540°. Outside lengths can shift by a fraction of an inch on walls that didn't move (the top wall's outside reading went from 11′ 1.35″ to 11′ 0.87″): the plan measures the outer face, and its mitre at a corner follows that corner's angle.
Joined wall, 150°: the cut wall turned, the right wall got longer, the top wall didn't move. - 6
What moves with This wall
Same corner, same 150°, but with This wall picked: now the top wall pivots on that corner, its left end slides up the left wall, and the cut wall stays exactly where it was.
Before After (This wall) Corner typed at 135° 150° Top wall (turned) 11′ 1.35″ 11′ 6.4″ Left wall (far wall) 16′ 6.5″ 19′ 5.98″ Top-left corner 90° 75° Cut wall doesn't move doesn't move Gross area 235 sq ft 251 sq ft Same number typed, a very different room: that's why the choice matters. When the result isn't what you wanted, Undo and type the angle again with the other choice.
This wall, 150°: the top wall tilted, its far corner went from 90° to 75°. - 7
Worked example: a 93° corner on a plain rectangle
On a plain 16 × 12 ft room, with the right wall selected and This wall picked, typing 93° at the bottom-right corner of the right wall gave:
Before After Bottom-right corner 90° 93° Top-right corner 90° 87° Top wall (inside) 16′ 16′ 7.55″ Right wall 13′ 1″ 13′ 1.22″ Gross area 224 sq ft 228 sq ft The corner at the other end of the turned wall always changes by the same amount the other way (93° here, 87° there), because the angles of any four-sided room add up to 360°.
With Joined wall (the start) instead, the same 93° would have turned the bottom wall: the right wall would have stayed put and the bottom wall's left end would have slid along the left wall.
Keep the wall you trust still. If the front wall is the one you trust, either tap the front wall and keep Joined wall (the side wall turns), or tap the side wall and pick This wall: either way the front wall never moves.
Interior walls joined to the turned wall follow it when the wall's link is on (how outside walls start); see Move walls alone or together. Undo takes the whole change back in one step.
This wall, 93° at the bottom: the right wall leans out, the top wall gets 7.55″ longer, the top corner reads 87°. - 8
A side drawn in two pieces turns as one straight wall
Plans often have one side made of two or more pieces that run straight on: a wall you split to give part of it a different height, or a side traced or drawn as two nearly straight walls. When the wall that turns carries straight on into more pieces (within about 20° of straight), all of those pieces turn together as one straight run: they stay in line, each keeps its share of the run's length, and it's the end of the whole run that slides along the wall beyond it. Earlier versions turned only the first piece and bent the side where the pieces met. Here the Cozy Living Room's right wall was split into two equal pieces (6′ 6.67″ each, the window on the upper one). With the cut wall selected, its lower corner was typed to 150° with Joined wall: the dashes mark the upper piece, the first wall of the run.
The right side is two pieces; the dashes mark the first one. - 9
The result: both pieces lean as one wall
Both pieces of the right side turned together and stay in one straight line (6′ 8.93″ and 6′ 10.32″ outside now), the window rode along on its piece, and the bottom wall got longer to meet the new end (13′ 5.5″ → 16′ 9.44″ inside; 235 → 257 sq ft). The split point is still there, so each piece keeps its own height and thickness. If one of the run's pieces is locked or curved, the run can't turn as a whole: the angle is then applied the older way, turning only the first piece (or refused with a note if that can't work either). The same happens when turning the whole run would make walls cross.
The two pieces turned as one straight wall; the bottom wall stretched to meet it. - 10
If the angle can't be applied, the note says why
When an angle can't be applied, nothing changes and a short red note appears beside the corner: - A locked wall stops this angle. Unlock it first. One of the walls whose length would change has its length locked (the padlock on its bar, or next to Length in its panel). An amber note at the top adds That would change a locked wall length. To change it, select the wall and tap the padlock next to Length. Unlock it, switch Which wall turns to the other wall, or type the angle at the other corner if that wall should keep its length. - That angle would make the walls cross. The turned wall would never meet the wall beyond it, would cut across another wall, or would shrink a wall to nothing. Try a smaller change, or type at the other corner. - A curved wall's angle can't be changed. The wall is curved (a door-carved or arched wall); change its neighbour instead. In the picture the right wall is selected with This wall picked and the top wall's length is locked, so typing 93° at the bottom-right corner is refused: turning the right wall would have made the top wall longer. (With Joined wall, the bottom wall would turn and the top wall wouldn't change, so the same angle would go through.) If a lock stops you, try the other choice before unlocking anything.
This wall picked, top wall locked: the angle is refused. Unlock it, or pick the other wall to turn. - 11
While drawing: start a wall at an angle to your plan
The same boxes work while you draw new outside walls with Build → Exterior Wall (see Add exterior walls right on your plan). When you start on your plan, at a corner or part-way along an outside wall, the new wall shows its angle to the walls on both sides: - Started part-way along a wall, the two angles add up to 180° (90° + 90° for a wall straight out). - Started at a square corner of the plan, they add up to 270°. Tap either one and type the angle you want; the other adjusts so they still add up. Here 60 was typed on the right-hand side, so the new 6 ft wall leans out at 60° to the top wall and 120° on the other side. The new wall turns around its starting point and keeps its length. An angle that would point the wall into your plan is refused, since exterior walls only add floor.
Started on a wall: 120° + 60° = 180°. Type either side. - 12
While drawing: every length and corner angle stays editable
Until you close the walls on your plan, nothing is final. Every wall you've drawn keeps its length pill, and every corner between two new walls keeps its angle pill (a pencil on each). Tap any of them and type: - A typed length changes that one wall; everything you drew after it moves along with it. - A typed angle (0° to 180° here, the angle between the two walls) turns everything drawn after that corner around it, keeping the side it turns to. So you can sketch the shape roughly first and then type the measurements in any order. The very first wall of a brand-new plan (Custom Floor Plan → Draw Your Own, or Add floor → Draw from scratch) shows its angle to the horizontal (0° for a level wall). Undo takes back each typed change, one at a time.
Mid-drawing: 6′ and 5′ 4″ walls, 60° and 120° angles, all still editable. - 13
Finish on the plan: the angled extension is part of the house
Pull the last + back onto an outside wall to close the new walls. The plan grows to take in the space (224 → 263 sq ft here), the new room gets its own label and measurements, and the stretch of the old wall now inside becomes an interior wall. The angles you typed are kept exactly. From here the new walls behave like any other outside wall: tap one and its corner angles show, ready to type. This is the quickest way to draw a bay, an angled porch or a wing that meets the house at something other than 90°.
Closed on the plan: the angled extension is a room of its own. - 14
Square a crooked corner: type 90
A plan drawn by hand or traced from a photo often ends up with a corner at 87° or 101°. Tap the slanted wall and its corners show the problem at once: 101.3° and 78.7° here. Type 90 at one of them, pick This wall so the slanted wall is the one that turns, and tap ✓: the wall swings square, the opposite corner becomes 90° too, and the wall beyond it gets longer (the plan went from 110 to 120 sq ft, a true 12 × 10 ft room). With Joined wall left on, the straight wall at that corner would turn instead and the slanted wall would stay slanted. To square every corner of an outline in one go, the Outline Editor's All 90° button is still there (Plan Settings → Layout → Outline Editor; see the Outline Editor). Typing the angle is better when only one corner is off, or when a corner really isn't square and you want its true angle.
A crooked corner shows itself: 78.7° at the top, 101.3° at the bottom. - 15
The result: both corners at 90°
After typing 90 at the 78.7° corner with This wall, both corners of the wall read 90° in green, the wall is 11′ 1″ long and square to its neighbours, and the plan is a true rectangle. Check the rest of the plan with View & Layers → Show corner angles, which marks every square corner in green and gives every other corner its number.
Typed 90: both corners square, the room a true rectangle. - 16
Measure the real angle of a corner
To type a corner's angle you first need it from the real room. Three ways, from quickest to most precise:
1. A digital angle finder (or a sliding bevel and a protractor): open its arms along the two walls at floor level and read the angle. Measure a few inches off the floor, above the baseboard.
2. The triangle method, with only a tape measure. From the corner, measure the same distance along each wall (4 ft is easy) and mark both points. Then measure straight across between the two marks (the diagonal). The diagonal tells you the angle:
Diagonal between marks 4 ft along each wall Corner angle 5′ 4.9″ 85° 5′ 6.7″ 88° 5′ 7.9″ 90° (square) 5′ 9.1″ 92° 5′ 9.6″ 93° 5′ 10.8″ 95° 7′ 4.7″ 135° The formula behind it: with marks a and b along the walls and diagonal c, the angle is arccos((a² + b² − c²) ÷ 2ab). For a 90° check alone, the builder's 3-4-5 rule is quicker: marks at 3 ft and 4 ft should be exactly 5 ft apart.
3. Lengths only. If you measured every wall and both diagonals of a four-sided room, typing the wall lengths and letting the plan close usually gets you within a degree; then read the corner angles off the plan and type the ones you measured directly.
A degree matters more than it looks: over a 12 ft wall, 1° moves the far end about 2.5 inches.
Tips
Tap the wall you trust, keep Joined wall
With Joined wall (how the box starts), the wall you tapped never moves. So tap your most trusted wall (usually the front wall or the one you measured first), type the angle at the corner where it meets the wall that's off, and only the other wall turns. Check the white dashes before tapping ✓.
Lock the lengths you're sure of
Lock a wall's length (the padlock on its bar) and no angle change can alter it; an angle that would is refused with a note. Lock the walls you measured carefully before you start adjusting angles.
Sketch first, type the numbers after
While drawing, rough the shape in with a few drags, then tap each length and angle pill and type the measured values. A typed value only moves what was drawn after it, so work from the first wall forwards.
See every corner at once
Turn on View & Layers → Show corner angles to check the whole outline: square corners are marked in green, every other corner shows its angle. It's the fastest way to find the one corner that's off.
Interior walls have their own angle boxes
A slanted interior wall shows its angle to the wall it starts from; tap it and type, and the wall swings round its starting end and keeps its length. See See and type the angle of a slanted interior wall.
Common mistakes
Typing an impossible angle
An angle outside 1–359° turns the box red and isn't applied, and one that would make the walls cross is refused with a note. Check the number you measured: the inside corner of an L-shaped plan is 270°, not 90°.
Turning the wrong wall
The box starts on Joined wall, so the wall across the corner turns, not the one you tapped. If the wall you wanted to keep moved, Undo and type the angle again with This wall (or tap the other wall first). The white dashes show which wall will turn before you tap ✓.
Changing the angle at the wrong corner
Typing at one corner turns the chosen wall around that corner and stretches the wall at its far end. If the far end was the part you wanted to keep, Undo and type at the other corner instead.
Fixing a crooked plan by dragging
Dragging corners by eye adds new errors. Type the measured angle (or 90 for a square corner), and type wall lengths from your tape measure.
Expecting the opposite corner to stay the same
In a four-sided room the corners always add up to 360°, so when one corner opens by 3°, another closes by 3°. That's geometry, not a mistake in the plan.
Frequently asked questions
How do I change the angle between two walls?
Tap one of the two walls (an outside wall). The angle at each of its corners shows with a pencil. Tap the corner's angle, type the new angle (for example 93), check Which wall turns (Joined wall turns the other wall at that corner, This wall turns the one you tapped; the turning wall is dashed on the plan) and tap ✓ or press Enter. The turning wall pivots on that corner; the wall at its far end gets longer or shorter.
Which wall moves when I type an angle?
The one you pick under Which wall turns. Joined wall (picked each time the box opens) turns the wall on the other side of the corner and leaves the wall you tapped exactly where it is; This wall turns the wall you tapped and leaves the joined wall where it is. The turning wall is marked with white dashes while you type. The wall at the turning wall's far end keeps its direction and only changes length; every other wall keeps its angle. (Before November 2026 the wall you tapped always turned.)
The wrong wall moved when I typed an angle. What happened?
The box starts on Joined wall, which turns the wall across the corner, not the one you tapped. Undo (one step), tap the angle again, pick This wall, and type it again. Or tap the other wall first and keep Joined wall.
Part of my wall bent when I typed an angle. Why?
That was how older versions handled a side made of two pieces. Now pieces that carry straight on (within about 20°) turn together as one straight wall. If a piece in that run has a locked length or is curved, only the first piece can turn; unlock it and try again to keep the side straight.
My room isn't square. Can I draw a 93° corner?
Yes. Draw or create the room, tap the side wall, tap the angle at the corner where it meets the front wall and type 93. Or type the angle while you draw the walls: every corner's angle stays editable until you close the plan.
Can I type the angle while I'm still drawing the walls?
Yes. With the Exterior Wall tool (and Draw Your Own or Draw from scratch for a new plan), every wall's length and every corner's angle stays on screen with a pencil until you finish. A wall started on your plan also shows its angle to the walls on both sides; type either one.
Why does the note say a locked wall stops this angle?
One of the walls whose length would change has its length locked. Unlock it (the padlock on its bar or next to Length in its panel), or type the angle at the other corner if that wall should keep its length.
What angle does the box show: inside or outside?
Inside: the angle on the room side of the corner, the same number View & Layers → Show corner angles shows. An outside corner of a rectangle is 90°; the inside corner of an L-shaped plan is 270°.
Can I make every corner 90° at once?
Yes: Plan Settings → Layout → Outline Editor → All 90°, then Update Floor Plan. To square a single corner, tap one of its walls, type 90 at that corner and pick the wall that's off to turn (This wall if you tapped the crooked one, Joined wall if you tapped its straight neighbour).
Does Undo work?
Yes. Each typed angle is one Undo step, on a finished plan and while drawing.
Does it work on a phone and with the plan rotated?
Yes. The angle pills and the box with ✓, ✕ and the Joined wall / This wall switch are the same on a phone or tablet (tapping the switch keeps the box open), and they follow the plan when it's rotated (Plan Settings → Rotation).
Start designing your room
Put this into practice in the floor planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.
Open RoomSketch3DOne-time purchase · No subscription · Web, iOS & Android