Draw an Electrical Plan — Outlets, Switches, Lights & Symbols — RoomSketch3D
Place outlets and switches on any wall — interior walls with an In/Out side toggle — drop lights and low-voltage symbols, and export a symbols-only electrical layer.
1 minUpdated 2026-11-17
Read the full step-by-step guideWhat this video covers
- 1Open the Symbols panel
- 2Place an outlet on a wall
- 3Add a switch beside the door
- 4On an interior wall, choose the side
- 5Move or delete an outlet or switch
- 6Set the kind, the height and the exact position
- 7Two or more devices in one box
- 8Label outlets and switches with breaker numbers
- 9Show the names on the plan
- 10Outlets gone from the plan? Check the layer
- 11Check every device has its number
- 12Print or export with the names
- 13Your printed breaker map
- 14Drop lights and low-voltage symbols
- 15Export the electrical layer
Prefer to read along? See the full written walkthrough with screenshots.
Start designing your room
Draw it, furnish it, walk through it in 3D — on web, iOS, and Android.
Open RoomSketch3DOne-time purchase · No subscription · Web, iOS & Android