Skip to main content

Connect Outlets & Lights Into Circuit Lines — RoomSketch3D

Link outlets, switches, and lights into numbered circuit lines that attach to the symbols, follow them when moved, undo hop by hop, and appear in every export.

1 minUpdated 2026-11-17
Read the full step-by-step guide

What this video covers

  1. 1Arm the Circuit line tool
  2. 2Tap the devices in order
  3. 3Route the line along the walls: tap empty space for a bend
  4. 4Bends around the room: a light circuit
  5. 5One switch to two lights: two lines from the same switch
  6. 6Finish the run
  7. 7Name the circuit after its breaker
  8. 8Add devices to a finished line
  9. 9Tap the new devices, then Done
  10. 10Add, move or remove bends on a finished line
  11. 11Take a device off a line
  12. 12Delete a device: its lines update
  13. 13Move a device and its line follows
  14. 14Undo a hop while drawing
  15. 15Print it with the names

Prefer to read along? See the full written walkthrough with screenshots.

Start designing your room

Draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android