Skip to main content

One-bedroom apartment layout

Put the open kitchen and living area on the entry side and the bedroom and bath behind a wall. In the bedroom, keep 24–36 inches beside the bed and 36 inches at the foot, and keep the window clear.

6 min readUpdated 2026-11-16

Most one-bedroom apartments split the same way: a public half with the entry, kitchen and living area, and a private half with the bedroom and bathroom behind an interior wall. Getting the split right means visitors never walk past the bed, and the bedroom gets a quiet corner with a window.

The Small 1-Bedroom Apartment template shows that layout. Below: the whole plan, a close-up of the bedroom with its clearances measured, and the apartment in 3D.

In this guide

  1. 1

    The public half and the private half

    In the template, the entry door opens into the living side. A one-wall kitchen runs along the top wall (refrigerator, range, sink and a base cabinet), the living area has a three-seat sofa on an 8 × 10 rug facing a TV console, and an interior wall separates the bedroom and the bathroom on the right. The bedroom door and the bathroom door both open off the living area, so guests can use the bathroom without walking through the bedroom. The rooms come named (Living & Kitchen, Bedroom, Bathroom): their tags show L, B and B, and tapping a tag opens the room's name, inside size and area (the bedroom is 9′ 7″ × 15′ 7″, 149 sq ft). Rename any of them with the pencil on the label, or with a mouse double-click the label, or right-click inside the room and choose Rename room; the same menu has Room color… for the room's floor colour (see Right-click menus and mouse navigation). That's the most common one-bedroom arrangement: plumbing for the kitchen and bath can share walls, and the bedroom is as far from the entry as possible.

    Small 1-Bedroom Apartment: kitchen and living on the entry side, bedroom and bath behind the wall.
  2. 2

    Bedroom clearances

    Common planning guidelines for a bedroom: 24 inches beside the bed at the least, 30–36 inches on the side you get in and around the foot, and 36 inches in front of a dresser so drawers open with you standing there. In the template's bedroom: - Open side of the bed to the wall: 2' 10.6" (34.6"), comfortably inside the 30–36" you want on the side you get in; the bedroom door is on this side. (The bed and rug were moved 7" toward the window in November 2026 so the doorway has clear floor on the bedroom side too.) - Foot of the bed to the dresser: 6' 11", plenty of room to open drawers and walk past. The queen bed sits on a 6 × 9 rug with a nightstand on the window side. Flow check is OK.

    Bedroom close-up: 2' 10.6" beside the bed, 6' 11" to the dresser.
  3. 3

    Code minimums for the bedroom

    Under the IRC (local codes vary), a bedroom is a habitable room: at least 70 sq ft (R304.1), at least 7 feet in every direction (R304.2) and a 7-foot ceiling (R305.1). As a sleeping room it needs an emergency escape and rescue opening: at least 5.7 sq ft net clear (5 sq ft at grade floor), 24 inches high and 20 inches wide at the least, with the sill no more than 44 inches above the floor (R310). Keep the bed's headboard and tall furniture from blocking it.

  4. 4

    Plan it in RoomSketch3D

    1. New design → Pre-designed layouts → Small 1-Bedroom Apartment (or Medium 2-Bedroom for a bigger plan), or draw the outline and add interior walls for the bedroom and bath. 2. Furnish each zone; search bed, sofa, dresser and so on. 3. Keep tape measurements beside the bed and in front of the dresser. 4. Open 3D with Dollhouse to see the whole apartment at once. Smart Flow Check flags pieces that overlap each other or a wall, anything in a door's swing, anything inside the 36-inch approach zone in front of a door or opening, tall pieces in front of a window, recliners that can't recline, and a coffee table too close to the sofa. It does not measure aisles, work-triangle legs or code clearances, so check those with the tape measure.

    The 1-bedroom in 3D, Dollhouse on.

Tips

Dining where the kitchen meets the living

A small round table or counter seating between the kitchen and the sofa gives each zone its edge.

Bed on the wall opposite the door

It's the first thing you see from the door and leaves both sides open.

Use the closet wall

Wardrobes and dressers go on the interior wall, keeping the window wall for light.

Common confusions

Bedroom door off the kitchen

Cooking smells and noise go straight in. Open the bedroom off the living area or a short hall.

A king in a small bedroom

A 76"-wide king in a 10-foot room leaves about 22" each side, under the 24" minimum. Check before you buy.

Frequently asked questions

How big is a typical one-bedroom apartment?

Commonly about 500 to 900 sq ft; the Small 1-Bedroom template is about 24 × 22 feet.

How much space do you need around a bed?

At least 24 inches at the sides, 30–36 inches on the side you get in and at the foot (common guidelines).

What's the minimum bedroom size?

Code minimum is 70 sq ft and 7 feet in each direction (IRC R304), with an escape window (R310). A queen bed with 24–36" around it needs about 10 × 10 feet.

How do I plan a one-bedroom in RoomSketch3D?

Create the outline, add interior walls to split bedroom, bath, and kitchen, then furnish each zone; Flow Check flags blocked doors and overlaps, and the tape measure checks the walkways.

Sources

Start designing your room

Put this into practice in the bedroom planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android