Skip to main content

Change the color, fabric, or finish of any piece

Select a piece and its panel shows the color controls that fit it: a Color row with swatches and a rainbow custom-color swatch for most items; a Fabric row (Weave, Linen, Velvet, Bouclé, Leather) with its own upholstery colors for sofas, chairs and beds; and a Finish button that opens real woods, paint colors and metals for tables, beds, dressers, cabinets and other wood-bodied pieces. The change shows in 2D and 3D at once.

6 min readUpdated 2026-11-17

Color is set per piece, from the same panel where you set its size. Select anything — a sofa, a bed, a dining table, a floor lamp, a base cabinet — and the panel shows the color controls that make sense for that piece. There are three kinds, and a piece only shows the ones that apply to it: - Color row — round swatches picked for that kind of item, plus a rainbow swatch at the end (Pick custom color) that opens your device's color picker for any shade. Lamps, rugs, décor and most other items use this row. - Fabric row — upholstered pieces (sofas, sectionals, armchairs, recliners, office and dining chairs, bedroom seating, bean bags and beds) get five fabrics — Weave, Linen, Velvet, Bouclé, Leather — with a Color set for the upholstery right beside them, including the custom-color swatch. - Finish — wood-bodied furniture (tables, desks, dining chairs, beds, sofa and chair frames and legs, dressers, nightstands, wardrobes, media units, buffets, bars and storage) has a Finish button that opens a window with Materials (eight real woods, from White oak to Espresso), Colors (painted finishes and a custom color) and Metal (Brushed Steel, Black Metal, Brass, Chrome, Bronze). Kitchen cabinets, islands and vanities use the same window, titled Cabinet finish; their door fronts and handles are in the cabinet's own tabs.

Changes apply immediately in both the 2D plan and the 3D view, save with the design, and stay when you duplicate it. The example below recolors the sofa and coffee table of the Cozy Living Room template: a blue-grey weave sofa becomes navy velvet, and a light oak coffee table becomes walnut.

Step by step

  1. 1

    See the starting point in 3D

    Before changing anything, open View in 3D (the cube button at the right end of the toolbar) and tick Dollhouse so the walls facing you are cut away. A quick look at the room as it is gives you a "before" to compare against — color decisions are easier side by side than from memory. Close the 3D view with the red × to get back to the plan.

    Before: the Cozy Living Room as the template ships, with a blue-grey weave sofa and a light oak coffee table.
  2. 2

    Select the piece

    Tap or click it on the plan. The piece's panel opens — on a computer it appears over the plan and moves out of the way of the piece you picked (drag its dotted handle to move it; Reset puts it back at the bottom), and on a phone it opens as a sheet. If two pieces overlap — a sofa standing on a rug, say — a Select item list appears so you can choose which one you meant. The color controls sit below the size boxes, Rotate and Quick sizes.

    A sofa's panel: the Fabric row and its Color swatches (highlighted), and the Finish button for the frame and legs below.
  3. 3

    Pick a swatch — or any color

    In the Color row, tap a swatch to apply it — the swatches are chosen for that kind of item, so a lamp offers different colors from a rug. The last swatch (the rainbow one, Pick custom color) opens your device's color picker: drag to any hue, or — in most computer browsers — type an exact hex code such as `#2E4A62` to match a paint chip or a product listing (the picker is your browser's or your device's own, so it looks a little different on each). The plan updates as you pick. The ring around a swatch shows which color the piece has now.

    Most items have a Color row; the rainbow swatch at the end opens a picker for any color.
  4. 4

    Set the fabric on sofas, chairs and beds

    Sofas, sectionals, armchairs, recliners, office and dining chairs, bedroom seating, bean bags and beds show a Fabric row — pick Weave, Linen, Velvet, Bouclé or Leather and the 3D material changes with it: velvet and leather catch the light differently from a flat weave. Weave is the default. The fabric tiles preview each fabric in the piece's current color, so pick the color first if you want to compare fabrics in that shade. The upholstery color is the Color set at the end of the same row — five swatches plus the custom-color swatch. That color is the fabric's own; the frame and legs are set separately with Finish (next step). In the example, the sofa is switched to Velvet and a custom navy (`#2E4A62`) is picked — the plan shows the new color straight away.

    Velvet selected and a custom navy picked: the sofa on the plan changes at once.
  5. 5

    Choose a wood, paint or metal finish

    Tables, desks, dining chairs, beds, dressers, nightstands, wardrobes, media units, buffets, bars, storage and the frames and legs of sofas and chairs have a Finish button showing the current finish (on a sofa, chair or bed still on its built-in frame it reads Standard). Tap it to open the Finish window: - Materials — eight real woods: White oak, Oak (natural), Maple, Teak, Cherry, Walnut (natural), Espresso and Weathered gray, rendered as wood-grain photos in 3D. - Colors — painted finishes plus a custom color (not offered on sofas, chairs and beds, whose fabric color is set in the Fabric row). - Metal — Brushed Steel, Black Metal, Brass, Chrome and Bronze. Tap a tile, then Apply. Closing the window without Apply leaves the piece as it was. In the example the coffee table goes from light oak to Walnut (natural).

    The Finish window: eight woods under Materials, paint under Colors, five metals under Metal. Tap Apply to use it.
  6. 6

    Kitchen cabinets, islands and vanities

    Select a cabinet and its panel shows Cabinet finish instead of Finish. It opens the same window — Materials, Colors (with a custom color) and Metal — plus an Apply to all cabinets button (Apply to all vanities for bathroom vanities) that gives every cabinet and island on the floor the same finish. Because it reaches every kitchen on that floor, it asks you to tap again to confirm. Long cabinet panels are split into tabs: Finish, Counter Top (the countertop material, with its own apply-to-all), Hardware (handles and knobs) and Doors & Shelves (door style, fronts, shelves). Taps, shower fixtures and bars have a Fixture finish row with Match all, which gives every tap, shower fixture, bar and glass fitting in the plan the same metal.

  7. 7

    Check it in 3D

    Tap View in 3D to see the colors under the room's lighting next to your wall paint and flooring. Open View options (bottom right) and tick High quality for the most accurate materials, and turn the dollhouse with the arrows at the bottom to look from another side. Colors are easiest to judge from inside the room in walk mode (the footprints button), at eye level, the way you'll see the real room. Compare with your "before" view: here the navy velvet sofa and the walnut table read much darker and warmer against the pale walls.

    After: the sofa in navy velvet and the coffee table in walnut, from the same angle as the before view.
  8. 8

    Copy a color to other pieces

    Duplicate the piece (Duplicate at the top of its panel) and the copy carries the color, fabric and finish. For a matching set — four dining chairs, two nightstands — recolor one, then duplicate it as many times as you need. For cabinets, Apply to all cabinets is quicker than duplicating.

Tips

Match a real product with a hex code

Retailer pages and paint chips often give a color name; a quick search usually gives its hex value. Type that into the custom color picker and the plan shows the real shade.

Walls and floors have their own tools

Wall paint, ceiling paint and flooring live in Materials → Surfaces (tabs Wall Paints, Ceiling Paints and Flooring Material), set per wall or per room. The Color row is for furniture and fixtures only.

Pick the color first, then compare fabrics

The Fabric tiles preview each fabric in the piece's current color, so set the color you're considering first and the five tiles show how that color looks as weave, linen, velvet, bouclé and leather.

Plan a palette, not single pieces

A common decorator's rule of thumb is roughly 60% one main color (walls, big rug), 30% a secondary color (the sofa, curtains) and 10% accent (cushions, a lamp, one chair). Recolor the biggest pieces first, then check the room in 3D before you fine-tune the small ones.

Judge color in High quality

Tick High quality in the 3D view's View options menu (bottom right) before deciding between close shades — wood grain and fabric sheen show properly there. On a slower device you can turn it off again afterwards.

Common mistakes

Looking for a pencil icon on the catalog tile

Colors aren't set in the catalog. Add the piece to the plan first, then select it — the color controls are in its panel.

Expecting every piece to have fabric options

Fabric applies to upholstered seating and beds. Hard goods take a color, or a wood, paint or metal finish, instead; appliances and plumbing fixtures keep their finish.

Using Finish to recolor a sofa's fabric

On sofas and chairs, Finish is the frame and legs. The fabric's color is the Color set at the end of the Fabric row.

Closing the Finish window without Apply

Tiles you tap in the Finish window are only a preview until you tap Apply. Close it with the × and the piece keeps its old finish.

Changing one cabinet when you meant the whole kitchen

A finish picked for one cabinet stays on that cabinet. Use Apply to all cabinets in the Cabinet finish window (it asks you to tap again to confirm, because it changes every cabinet and island on the floor).

Frequently asked questions

Can I change the color of kitchen cabinets?

Yes. Select a cabinet and tap Cabinet finish: pick a wood under Materials, a paint color (or a custom color) under Colors, or a metal, then Apply — or Apply to all cabinets for the whole kitchen. Door fronts and handles are in the cabinet's Hardware and Doors & Shelves tabs, and the countertop is in Counter Top.

Can I use a photo of my own fabric or material?

Not as a texture — the 3D materials are the built-in set. You can match the color exactly with the custom color picker, and pick the closest fabric type for the sheen and weave.

Does the color show in exports?

Yes — the 2D export uses the piece color, and the 3D export (GLB) carries the materials. The Black & white plan style intentionally drops color.

Why is a piece grey and won't take a color?

A few items — appliances, sinks, toilets, some structures — have a fixed finish. If the piece has no Color row, Fabric row or Finish button, that's why. Pick a different catalog variant if the finish matters.

Can a table be painted instead of wood?

Yes. Open its Finish, switch to the Colors tab and pick a paint color or a custom color, then Apply. Switch back to Materials any time to return to real wood.

How do I go back to the original color?

Use Undo in the toolbar straight after the change. Later on, pick the original swatch again — or, for fabric, pick Weave, which is the default.

Start designing your room

Put this into practice in the room planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android