Doorway, hallway, and walkway widths
Interior doors are 24–36 in wide, hallways 36–48 in, walkways 36 in. Keep the door's swing and the 36 in in front of it clear. The ADA numbers for accessible routes, and how Flow Check guards your doors.
Quick answer: interior doors are usually 28–36 in wide (32 in is the most common for bedrooms, 36 in for entry doors), hallways 36–48 in, and main walkways through a room 36 in. Keep the door's swing clear plus about 36 in in front of it on the side you approach. For accessible routes, the 2010 ADA Standards require a 32 in clear opening at doors and 36 in for walking surfaces.
A door is only as wide as what's left after the door itself: a 32-inch door gives about 29–30 in of clear opening once the door's thickness and stop are taken off. And a door that hits a dresser every time it opens is a daily annoyance. Here are the widths to plan for, the ADA minimums, and how RoomSketch3D's Flow Check watches every door.
In this guide
- 1
Widths at a glance
Element Typical Comfortable / accessible Closet / bathroom door 24–30 in 32 in Bedroom door 30–32 in 34–36 in Entry door 36 in 36–42 in Door height 80 in (6 ft 8 in) 80–96 in Clear opening of a door (ADA) — 32 in minimum (36 in where the opening is more than 24 in deep) Hallway 36 in 42–48 in Main walkway in a room 30 in 36–42 in Approach in front of a door 36 in 48–60 in for a wheelchair Wheelchair turning space (ADA) — 60 in circle or T-shape in a 60 in square The ADA's 36-inch walking width may narrow to 32 in for a stretch no longer than 24 in (a doorway, for example). Making a U-turn around something under 48 in wide needs 42 in going in and out and 48 in at the turn.
- 2
Set the door's width
Tap a door on the plan to open its panel. Width has quick choices (2' 6", 2' 8", 3', 3' 6" and Other for any width), plus Height (6' 8" to start), its two Along wall distances (← and →, or ↑ and ↓), the swing (In / Out, L / R), Open / Closed and the hardware. Remember that a 2' 8" (32 in) door gives less than 32 in clear; if you need a 32 in clear opening, plan a 36 in door.
A door's panel: Width, Height, position, swing and hardware. - 3
Furniture in the swing: an issue to fix
Smart Flow Check keeps every door's swing clear. Put a dresser where the door opens and it's flagged as an issue: 3-Drawer Dresser blocks door. Move it away from the door swing. The piece is outlined in red on the plan. Flow Check also warns (in amber) when something sits in the 36-inch approach zone in front of a door, opening, sliding door, French doors or a fireplace, even if it's clear of the swing.
A dresser in the door's swing: Flow Check flags it. - 4
Clear the door and keep the walkway
Move the dresser out of the swing and Flow Check shows All good! Then check the walkway from the door to the bed and the closet with the tape measure: here 5' 7" beside the bed and 3' 3.5" between the dresser and the bed. Flow Check doesn't measure walkways, so this is a quick manual check.
Door clear, walkways measured: Flow Check is happy. - 5
Walkways between fixed pieces
In kitchens and halls the furniture doesn't move, so the walkway has to be planned. The U-Shape Kitchen with Island keeps 3' 6" (42 in) on both sides of its island, enough for one cook and someone passing. For a hallway, 36 in is the common minimum and 42–48 in lets two people pass or a wheelchair turn into a door.
42-inch walkways around a kitchen island.
Tips
Swap the swing before moving furniture
If a door swing hits a dresser or bed, try reversing it (In / Out, L / R) or a pocket or barn door before rearranging the room.
Latch-side space helps
On the side of the door with the handle, 12–18 in of wall beside the door makes it easier to open while holding something.
Common confusions
Treating the door size as the clear width
A 32-inch door gives about 29–30 in clear. For wheelchair access you usually need a 36-inch door.
Furniture just outside the swing
Clear of the swing isn't the same as clear to walk through. Keep 36 in in front of the door; Flow Check warns about the approach zone.
Frequently asked questions
What's the standard hallway width?
36–42 in. Many US residential codes require at least 36 in; 42–48 in is comfortable and better for accessibility.
How much clearance does a doorway need?
The swing plus about 36 in in front of it on the approach side. RoomSketch3D's Flow Check flags furniture in either zone.
What is the ADA door width?
32 in of clear opening with the door open 90°, which usually means a 36-inch door (2010 ADA Standards 404.2.3).
How wide should a walkway be?
36 in for a main walkway (the ADA minimum for an accessible route is also 36 in); 30 in is tight.
Does RoomSketch3D enforce the 36-inch door approach?
Yes. Smart Flow Check warns when furniture crowds the 36-inch approach zone in front of a door, opening or fireplace, and flags anything inside a door's swing as an issue to fix.
Sources
- 2010 ADA Standards for Accessible Design, 404.2.3 — door clear width — 32 in minimum clear width; 36 in where the opening is more than 24 in deep.
- 2010 ADA Standards for Accessible Design, 403.5.1 — clear width of walking surfaces — 36 in minimum; may narrow to 32 in for a stretch no longer than 24 in.
- 2010 ADA Standards for Accessible Design, 403.5.2 — clear width at a 180° turn — Turning around an element less than 48 in wide: 42 in approaching, 48 in at the turn, 42 in leaving (not required where the turn is 60 in wide).
- 2010 ADA Standards for Accessible Design, 304.3 — turning space — A 60 in diameter circle, or a T-shape within a 60 in square with 36 in wide arms.
Start designing your room
Put this into practice in the room planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.
Open RoomSketch3DOne-time purchase · No subscription · Web, iOS & Android