Design a prayer corner — the altar, the seat, the calm
Whether you call it a puja corner, a home altar, or a meditation shrine, the geometry is the same and almost no guide ever draws it: an altar surface against the wall, floor seating about 20 inches back, and everything else out of the sightline. This plan does it in eight by eight feet with five catalog pieces — a console table, two small bean bags, a 6 ft round rug, two plants, and a basket. Place it in 2D, then sit in it in 3D before you clear the real corner.
Watch it
Design a prayer corner in 40 seconds
Every piece at its true size, clearances checked, then a walk around it in 3D. The list, sizes, and steps are below.
Many homes keep a devotional space — a puja corner, a home altar, an icon shelf, a meditation shrine — and almost no floor-plan guide ever draws one. The geometry turns out to be simple and worth drawing: an altar surface against the wall, seating on the floor about 20 inches back, and everything else kept out of the sightline between the two. That's the whole plan, and it fits in eight by eight feet.
The template is drawn as an open zone — no exterior walls of its own — so you can drop it into a corner of any room you already have. Search the exact names below in the Furnish panel, place the five pieces, and check the seated view in 3D before you move anything real.
Or let the app place it: tap the Auto-furnish wand in the toolbar, drag a box over the area you want to use, type Prayer Corner in the search box and pick its card. Every piece lands against your walls, with a Fits or Tight badge for the space you drew — then edit anything. More in Auto-furnish.
What you'll need
- •Console Table (48″ × 14″, 30″ tall) — the altar surface, against the wall
- •Small Bean Bag × 2 (30″ across) — floor seating facing the altar; swap for cushions you own
- •Round Rug 6ft (72″ across) — the circle the quiet happens in
- •Small Plant × 2 (24″ tall) — fresh green at the flanks
- •Storage Basket (16″ across) — shawls, mats, and prayer books
- •An 8 × 8 ft corner away from the traffic of the house
Step by step
- 1
Set the altar surface against the wall
Search Console Table and place it flat against the top wall of the zone, a little left of center. It's 48 inches wide but only 14 deep — a shelf-like surface, not a table you sit at — and its top lands at 30 inches, so whatever your tradition places there (deities, icons, a candle, an incense holder) sits right around eye level when you're seated on the floor below. What goes on top is yours; the plan only promises it a clear, steady wall.
- 2
Draw the circle with the round rug
Search Round Rug 6ft and center it in front of the altar. The 72-inch circle defines the sacred space — inside the rug is the practice, outside is the rest of the room. Rugs underlay everything, so slide its top edge until it just tucks under the table's front legs and the circle and the altar read as one place.
The whole corner on the plan — altar on the wall, two seats on the circle, green and storage at the edges. - 3
Floor seating, about 20 inches back
Search Small Bean Bag and place two side by side on the rug, facing the altar, with about 20 inches of open floor between the table's front edge and the seats. That gap is the working space of the corner — room to bow, kneel, light a lamp, or set down a book — and from a seat 20 inches back, the 30-inch tabletop is comfortably in view. The bean bags are stand-ins: at 30 inches across each, they hold the spot for any floor cushions you already own.
- 4
Green at the flanks, storage in the corner
Search Small Plant and place one beside the altar table and the second along the side of the zone — fresh and living, but at the flanks, never between the seats and the altar. Then tuck a Storage Basket into the far corner behind the seating: shawls, prayer mats, mala beads, and books live there, so the altar itself never has to hold them.
- 5
Sit in it in 3D
Switch to 3D, drop the camera low near the bean bags, and look toward the altar — this is the view the whole plan exists for. The tabletop should sit at eye level, the sightline should hold nothing but the altar, and the plants and basket should stay in the edges of the view. If anything crowds the line, move it out; the emptiness in the middle is the design.
The corner in 3D — a clear line from the floor seats to the altar, everything else at the edges. - 6
Or let Auto-furnish place the Prayer Corner for you
Everything above can also be done in one go. Open your plan, tap the Auto-furnish wand in the toolbar and drag a box over the spot, tracing the walls you want the pieces against — at least 8 × 8 ft for this layout. In the Ideas list, type Prayer Corner in the search box and pick its card; if it isn't among the first six cards, tap Show more. A Fits badge means the layout fits the box you drew, Tight means it is up to about 12% too big and a piece may sit a little past an edge. The seven pieces land against your walls, and Variation 1–5 offer other arrangements — mirrored, turned to another wall or corner, or with a piece swapped for a similar one; where it can, it skips arrangements that would land on furniture already in your plan. If the plan still looks empty after you pick the card, tap Variation 2 (or any other variation) and the pieces appear — a known glitch can leave the first variation undrawn. Tap View in 3D to check it, then Done: the whole placement is one undo step, and every piece stays editable. More in Auto-furnish.
Drawn over the top-left corner of a plain 12×12 ft room, the Prayer Corner lands in a few taps — seven pieces, a choice of variations, every piece still editable.
Tips
Face the direction your tradition prefers
Many practices care which way the altar faces — east is common for a puja corner, other traditions have their own directions. Rotate the whole plan as one piece until the altar wall faces the right way; the geometry — 20 inches back, clear sightline — holds at any compass angle.
Put it where the morning light lands
A corner that catches early light makes morning practice easier to keep. Aim for light falling across the space from the side, not from a window behind the altar shining into your eyes — and the two Small Plant flanks will thank you for the same spot.
Keep the altar wall clutter-free
The wall above the Console Table carries only what belongs to the practice. Everything else — shawls, mats, extra books — goes in the Storage Basket behind the seats, so the eye finds the altar and nothing else.
Common mistakes
Seating pushed hard against the table
Sit a bean bag right at the altar and there's no room to bow or kneel, and the tabletop looms overhead instead of resting at eye level. Keep the 20 inches of open floor between the table's front edge and the seats — it's the most important measurement on the plan.
Letting the altar become a shelf
Flat surfaces collect keys, mail, and chargers, and a devotional table stops feeling devotional fast. The basket in the corner exists exactly so the altar never has to store anything — if it doesn't belong to the practice, it doesn't go on the table.
Anything tall in the sightline
A plant or lamp placed between the seats and the altar breaks the one view the corner is built around. Keep the middle of the rug empty and hold everything vertical to the flanks and corners — check it from a seated camera in 3D.
Frequently asked questions
How much space does a prayer corner need?
Eight by eight feet seats two people comfortably on the floor with a 48-inch altar surface and a 6 ft circle of rug. With one seat and a narrower table you can shrink toward six by six — but keep the 20 inches of open floor in front of the altar whatever else gives.
Which direction should a prayer corner face?
Whichever your tradition prefers — east is common for Hindu puja spaces, Muslim prayer faces the qibla, and many home altars and meditation shrines simply face the quietest wall. Rotate the entire plan as one piece so the altar wall points the right way; the layout works at any angle.
Do I need to use these exact pieces?
No — they're stand-ins with honest dimensions. The two small bean bags hold the spot for any floor cushions you own, and any narrow table about 30 inches tall and four feet wide serves as the altar. Plan with the catalog pieces to get the spacing right, then substitute what you have.
Start designing your room
Put this into practice in the 3D room planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.
Open RoomSketch3DOne-time purchase · No subscription · Web, iOS & Android