Standard window sizes
Standard window widths and heights for every common type, the bedroom egress minimums, and how to set each size in RoomSketch3D.
Residential windows come in standard sizes from manufacturer catalogs. Use this page as a reference.
Quick answer: the most common bedroom windows are 30–36 inches wide × 48–60 inches tall (double-hung) or 60–72 × 36–48 (slider); living-room picture windows are often 60 × 48 or 72 × 60. Every bedroom also needs one window that meets the egress minimums below.
Two things to know before you order. First, catalog sizes are usually frame sizes in odd fractions, not round numbers — for example, Andersen's 400 Series double-hung cottage-sash chart lists frame widths of 2'-1 5/8", 2'-5 5/8", 2'-9 5/8", 3'-1 5/8", 3'-5 5/8" and 3'-9 5/8". Second, the wall opening (rough opening) is a little larger than the frame. On a floor plan you'll use the nominal width rounded to the inch; for ordering, use the manufacturer's chart.
In this guide
- 1
Widths on a real wall
This plan shows the four most-used widths on one wall: 2 ft, 3 ft, 4 ft and 6 ft windows, each with a tape measurement under it. In RoomSketch3D the Window tile offers width presets 2', 3', 4', 5' and Other for any width, so a 6-ft picture window is Other → 6 ft (or a 4-ft and a 2-ft unit side by side).
2', 3', 4' and 6' windows on one wall, measured with the tape measure. - 2
Picture (fixed)
Width: 24-96 inches. 36, 48, 60, 72 are most common. Height: 24-96 inches. 36, 48, 60 are most common. Typical living-room: 60 × 48 or 72 × 60.
- 3
Double-hung
Width: 24-48 inches. Height: 36-72 inches. Common: 30 × 48, 30 × 60, 36 × 60.
- 4
Casement
Width: 18-36 inches (each; pairs 36-72 total). Height: 36-72 inches. Common: 24 × 48, 30 × 60.
- 5
Sliding (horizontal)
Width: 36-96 inches. Height: 24-60 inches. Common: 60 × 36, 72 × 48, 96 × 48.
- 6
Bay windows (overall)
Width: 60-120 inches. Height: 48-84 inches. Projection: 16-36 inches.
- 7
Transom
Width: matches door or window below. Height: 12-18 inches. Use: above doors or windows for borrowed daylight.
- 8
Size chart
Type Common widths Common heights Typical use Picture (fixed) 36–72 in 36–60 in Living room view wall Double-hung 24–48 in 36–72 in Bedrooms, traditional homes Casement 18–36 in each 36–72 in Kitchens, over counters Slider 36–96 in 24–60 in Bedrooms, ranch and modern Bay (overall) 60–120 in 48–84 in Living, dining, breakfast nook Transom Matches below 12–18 in Over doors and windows These are typical catalog ranges, not code requirements. Always confirm the exact size on the manufacturer's sizing chart.
- 9
Egress (bedroom)
Minimum opening width: 20 inches. Minimum opening height: 24 inches. Minimum opening area: 5.7 sq ft (5.0 for a grade-floor opening). Maximum sill height: 44 inches from floor. Check local code. These are the 2021 International Residential Code minimums for an emergency escape and rescue opening (R310.2.1–R310.2.3), required in every sleeping room, in basements and in habitable attics (R310.1). They describe the net clear opening when the window is open — not the frame. A 20 × 24 opening is only 3.3 sq ft, so a window that just meets both minimums still fails the area rule; a common way to pass is a casement about 24 in wide with a 41-inch clear height, or a slider wide enough that half of it clears 5.7 sq ft.
- 10
Set the size in RoomSketch3D
Select a window to open its settings. Width has presets (2'–5' for a Window, 3'–5' for a Sliding Window) and Other for anything else; Height is the glass height; Mount is the sill height above the floor. A Window starts 4 ft tall at a 2 ft 6 in sill; a Sliding Window starts 3 ft tall at a 3 ft sill. The two Along wall distances (← →, or ↑ ↓ on a wall that runs up and down the plan) place it exactly along the wall.
Width, Height and Mount (sill height) for a selected window. - 11
Check the sizes in 3D
Open View in 3D to see the windows at their real heights. Line up the window heads (sill + height) along a wall — that's what the eye notices from inside and from the street.
The four widths in 3D, all at the standard 2 ft 6 in sill. - 12
From outside
From outside, the same windows show how a facade reads with mixed widths. Repeating one or two sizes usually looks calmer than four different ones.
The same wall from outside.
Tips
Keep 18 inches clear in front of windows
Flow Check warns when furniture 48 inches or taller sits within 18 inches in front of a window: a Window, a Sliding Window, or a bay window's opening and alcove. Low pieces (benches, side tables, a bed headboard below the sill) are fine.
Plan with nominal sizes, order from the chart
Draw the window at its rounded width on the plan; when ordering, read the manufacturer's frame and rough-opening sizes.
Frequently asked questions
What's the standard size of a bedroom window?
30-36 inches wide × 48-60 inches tall for double-hung; 60-72 × 36-48 for sliders. Must meet egress (~5.7 sq ft openable area).
What's the standard living room picture window size?
60 × 48 or 72 × 60 are most common.
How do I set a window's size in RoomSketch3D?
Place a Window on a wall and set its width and sill height in its settings; the sill (Mount) defaults to 2 ft 6 in for a Window and 3 ft for a Sliding Window, and you can change it.
What is the minimum size for an egress window?
Under the 2021 IRC: at least 5.7 sq ft of net clear opening (5.0 sq ft at grade floor), at least 20 in wide and 24 in high when open, with the sill no higher than 44 in above the floor. Local codes vary.
Sources
- 2021 International Residential Code — R310.1, R310.2.1–R310.2.3 emergency escape and rescue openings — Unamended 2021 IRC as adopted by Colorado, read on UpCodes. Local codes vary.
- Andersen 400 Series Tilt-Wash Double-Hung (cottage sash) size table — Example manufacturer frame sizes ("Window Dimension" = outside frame to frame).
Start designing your room
Put this into practice in the floor plan maker: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.
Open RoomSketch3DOne-time purchase · No subscription · Web, iOS & Android