Skip to main content

Nightstand and dresser dimensions

Nightstands are 18–28 in wide and 24–28 in high (level with the mattress top); dressers 30–66 in wide and about 18–20 in deep. Plus the 36 in to leave in front of drawers.

5 min readUpdated 2026-11-02

Quick answer: a nightstand is usually 18–28 in wide, 16–20 in deep and 24–28 in high, with its top level with the top of the mattress (or up to 2 in above). A low, wide dresser is 30–66 in wide, 18–20 in deep and 30–36 in high; a tall chest is 30–40 in wide and 44–60 in high. Leave about 36 in in front of a dresser to pull the drawers out and stand.

In a bedroom the bed takes most of the floor, so the storage around it has to fit what's left: a nightstand that's too wide crowds the walkway along the bed, a dresser at the foot of the bed with only 24 in in front of it can't be opened. Here are the sizes, the spacing, and how to check both in RoomSketch3D.

In this guide

  1. 1

    Sizes at a glance

    PieceWidthDepthHeight
    Small nightstand16–20 in14–16 in22–26 in
    Nightstand20–26 in16–20 in24–28 in
    Wide nightstand26–30 in16–20 in24–28 in
    3-drawer dresser30–36 in16–20 in28–32 in
    6-drawer (double) dresser50–60 in18–20 in30–34 in
    Wide dresser60–72 in18–22 in32–36 in
    Tall chest30–40 in18–20 in44–60 in
    Lingerie chest18–24 in14–16 in48–54 in

    In the catalog: Small Nightstand 18 × 16 × 24 in, Nightstand 24 × 18 × 26, Wide Nightstand 28 × 18 × 26, Tall Nightstand 20 × 16 × 30, 3-Drawer Dresser 30 × 18 × 30, 6-Drawer Dresser 54 × 18 × 32, Wide Dresser 66 × 20 × 34, Tall Dresser/Chest 36 × 18 × 48 and Lingerie Chest 20 × 16 × 50.

    Four nightstands and five dressers and chests at real size.
  2. 2

    Heights in 3D

    The footprint tells you what fits; the height tells you what works. A nightstand's top should be within about 2 in of the mattress top (most mattresses on a frame sit 22–28 in high), so a lamp and a glass of water are at arm's reach. Tall chests (48 in and up) give the most storage per square foot of floor but read as heavy in a small room and must stay clear of windows.

    The same pieces in 3D: from 24-inch nightstands to a 50-inch lingerie chest.
  3. 3

    Clearances around the bed and dresser

    - In front of a dresser: 36 in to open drawers and stand; 30 in at a minimum. - Beside the bed: 24–30 in on each side you get in from. - Nightstand to bed: 0–4 in; it can touch the bed frame. - Dresser side to a wall: a few inches so the drawer pulls clear. Worked example (Medium Bedroom template): a 60 × 80 in Queen Bed against one wall, two 24 × 18 in Nightstands, and a 54 × 18 in 6-Drawer Dresser on the opposite wall. The tape measure shows 3' 3.5" (39.5 in) from the dresser front to the foot of the bed, a comfortable drawer-and-walkway zone, and 5' 7" from the side of the bed to the far wall.

    39.5 in between the dresser and the bed: room to open the drawers.
  4. 4

    Keep tall pieces off the windows

    A tall chest under a window cuts the light and makes the window hard to open. Smart Flow Check flags any piece 48 in or taller that stands within 18 in of a window: Tall Dresser/Chest blocks a window. Tall furniture covers a window — natural light and views are limited. Low dressers and nightstands are fine under a window.

    A 48-inch chest under the window: Flow Check warns.
  5. 5

    Check the room in 3D

    Move the chest to a solid wall and Flow Check clears. Then open the 3D view to see the nightstands against the bed and the dresser across from it.

    The bedroom in 3D.
  6. 6

    Anchor dressers to the wall

    Dressers and chests can tip over when drawers are open or a child climbs them. The U.S. Consumer Product Safety Commission counted 234 deaths from clothing-storage-unit tip-overs from January 2000 to April 2022, 199 of them children, and recommends anchoring dressers securely to the wall. A mandatory U.S. stability standard for new clothing storage units took effect on September 1, 2023. When you plan a dresser's spot, put it against a wall with a stud or solid backing for the anchor.

Tips

Match the nightstand to the bed, not the room

A king bed (76 in) looks right with 26–30 in nightstands; a twin with 16–20 in ones. Check the walkway beside the bed stays at least 24 in.

Use a tall chest where floor is short

A 36-inch-wide, 48-inch-tall chest holds about as much as a 54-inch low dresser on two-thirds of the floor.

Type your own sizes

Select the nightstand or dresser and type its W, D and H from the listing in its panel.

Common confusions

A dresser at the foot of the bed with 24 in in front

Drawers 16–18 in deep plus you standing need about 36 in.

Nightstands taller than the mattress by a lot

More than about 4 in above the mattress top and the lamp glares and the alarm clock is out of reach.

Frequently asked questions

What's the standard nightstand height?

24–28 in, within about 2 in of the top of the mattress. The catalog's Nightstand is 26 in high.

What are standard dresser dimensions?

30–66 in wide, 18–20 in deep and 30–36 in high for a low dresser; a tall chest is 30–40 in wide and 44–60 in high.

How much space do you need in front of a dresser?

About 36 in to pull drawers out and stand; 30 in is tight.

Can a dresser go under a window?

A low one, yes. RoomSketch3D's Flow Check warns about pieces 48 in or taller within 18 in of a window.

Should I anchor a dresser?

Yes. The CPSC recommends anchoring dressers and other clothing storage units to the wall to prevent tip-overs.

Sources

Start designing your room

Put this into practice in the room planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android