Accent chair dimensions
Accent chairs run about 26–40 in wide and 30–40 in deep; recliners need about 2 more feet when reclined. Sizes by chair type, the spacing around them, and how to check a recliner's clearance automatically.
Quick answer: a standard accent chair is about 28–32 in wide, 30–34 in deep and 30–36 in tall, with an 18-inch seat height. Club chairs and oversized armchairs are bigger (34–40 in wide and deep); slipper chairs smaller (24–30 in). A recliner is about 32–42 in wide and 36–44 in deep upright, and needs roughly 24 in more in front when it's reclined.
Chairs are where living-room layouts go wrong quietly: two oversized armchairs can take as much floor as a second sofa, and a recliner placed against a wall can't recline at all. Below are the sizes by type, how to space chairs in a conversation group, and how RoomSketch3D checks the recliner case for you.
In this guide
- 1
Sizes by chair type
Chair type Width Depth Height Seat height Slipper chair (armless) 24–30 in 28–32 in 30–34 in 16–18 in Accent chair 28–32 in 30–34 in 30–36 in 17–19 in Club chair 32–38 in 32–38 in 28–34 in 16–18 in Wingback 30–36 in 32–36 in 40–48 in 17–19 in Oversized armchair 38–44 in 38–42 in 34–38 in 17–19 in Recliner (upright) 32–42 in 36–44 in 38–42 in 18–20 in The catalog pieces match these: Accent Chair 30 × 32 × 34 in, Lounge Armchair 30 × 32 × 30, Club Chair 36 × 34 × 32, Armchair 40 × 40 × 36, Recliner 36 × 40 × 40 and Oversized Recliner 42 × 44 × 42.
Accent, lounge, club, armchair and two recliners at real size. - 2
Compare them in 3D
Width and depth tell you the footprint; the 3D view shows the visual weight. A 40-inch armchair with thick arms reads twice as big as a 30-inch accent chair even though it's only 10 in wider. In a small room, pick a chair with slim arms and visible legs: it takes the same floor but looks lighter.
The same six chairs in 3D. - 3
Spacing in a conversation group
- Chair to coffee table: about 18 in (14–24), the same as a sofa. - Chair to sofa, side by side: 6–12 in, with a side table between them if there's room. - Across a conversation group: 4–8 ft between facing seats; past about 10 ft people raise their voices. - Walkway past a chair: 30–36 in. Worked example: two 30-inch accent chairs facing a 84-inch sofa across a 48 × 24 in coffee table. Sofa depth 38 + 18 + 24 + 18 + chair depth 32 = 130 in, so the group needs about 11 ft front to back before you add a walkway.
- 4
Recliners need room to recline
A recliner's footprint changes when it opens: the Recliner goes from 40 in deep to 64 in, the Oversized Recliner from 44 in to 70 in. Smart Flow Check knows each recliner's reclined depth. Put one with its back too close to the wall and it warns: Recliner can't recline. Will hit the wall when extended. Move it forward. It also warns when the footrest would hit another piece.
Too close to the wall: Flow Check says the recliner can't recline. - 5
Move it forward until the warning clears
Slide the recliner away from the wall (here it ends up 31 in from the wall, measured with the tape measure) and Flow Check turns to All good! Wall-hugger recliners need only 4–6 in behind; standard ones like this need more. Check the manufacturer's clearance and type it in as the distance from the wall.
Moved forward, the recliner has room to recline. - 6
See it reclined
Select the recliner and tap the Recline button in its panel (next to the flip buttons). The plan redraws it at its reclined depth (3 ft × 5 ft 4 in for the Recliner) and the 3D view shows the back down and the footrest up. Tap the same button (Upright) to put it back.
Reclined, the Recliner takes 5 ft 4 in of depth on the plan. - 7
Reclined in 3D
In 3D you can see what the extra 24 in is: the back drops and the footrest swings out in front. Use this view to check the footrest clears a coffee table or the path to the door.
The recliner reclined in 3D.
Tips
Match seat heights
Chairs and sofa in one group feel right when their seats are within 1–2 in of each other (about 17–19 in).
Taller backs belong against a wall
A wingback (40–48 in tall) blocks sightlines in the middle of a room. Put it beside a fireplace or in a corner; keep low-back chairs for the open side of a group.
Set your chair's real size
Select the chair and type its W, D and H from the product page into its panel, then pick the Fabric and Color.
Common confusions
Two oversized armchairs in a small room
Two 40-inch armchairs plus their walkways need about as much floor as an 84-inch sofa. In a room under 12 × 14 ft, choose 28–32 in chairs.
A recliner backed against the wall
Unless it's a wall-hugger, a standard recliner needs about 12 in or more behind it. Flow Check catches this for the catalog recliners.
Frequently asked questions
What is the standard size of an accent chair?
About 28–32 in wide, 30–34 in deep and 30–36 in tall, with an 18-inch seat. The catalog's Accent Chair is 30 × 32 × 34 in.
How much space does a recliner need?
About 24 in more depth when reclined, plus clearance behind it unless it's a wall-hugger. The catalog's Recliner is 40 in deep upright and 64 in reclined; the Oversized Recliner 44 in and 70 in.
Does RoomSketch3D check if a recliner can recline?
Yes. Smart Flow Check uses each recliner's reclined depth and warns when it would hit a wall, another piece or a built-in fixture as it opens.
How far apart should two accent chairs be?
About 6–18 in apart side by side (room for a side table), and 4–8 ft across a conversation group when they face each other or a sofa.
What is a club chair's size?
About 32–38 in wide and deep and 28–34 in tall. The catalog's Club Chair is 36 × 34 × 32 in.
Start designing your room
Put this into practice in the room planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.
Open RoomSketch3DOne-time purchase · No subscription · Web, iOS & Android