Design a nursery corner — built for 3 a.m.
Design the nursery for 3 a.m., not for the photos: crib, a real chair for the night feeds, a dresser that doubles as the changing station, soft light, and a rug underfoot. Six catalog pieces in an 8×10 corner — of its own room or yours.
Watch it
Design a nursery corner in 40 seconds
Every piece at its true size, clearances checked, then a walk around it in 3D. The list, sizes, and steps are below.
Every nursery gets designed twice: once for the photos, and again at 3 a.m. when you're crossing it in the dark holding a baby. Design for the second one — short paths, soft light, nothing to trip on.
Six catalog pieces do it. Search the exact names, place them in your own room, and walk the night path in 3D: door → crib → chair → changing spot, no obstacles.
Or let the app place it: tap the Auto-furnish wand in the toolbar, drag a box over the area you want to use, type Nursery Corner in the search box and pick its card. Every piece lands against your walls, with a Fits or Tight badge for the space you drew — then edit anything. More in Auto-furnish.
What you'll need
- •Crib (28″ × 52″)
- •Reading Chair — the 3 a.m. chair
- •3-Drawer Dresser (30″ × 18″) — top it with a changing pad
- •Bedside Lamp — low, warm light
- •Storage Basket — the toy tide line
- •Area Rug 5x7
- •An 8×10 ft corner — a nursery room, or your own bedroom's corner
Step by step
- 1
Crib on the calm wall
Search Crib and put it on the wall away from the door and off the window line — no drafts, no hallway light in sleeping eyes. Long side out, so you can reach in without a corner in your ribs.
The corner on the plan — crib on the calm wall, chair facing it, changing station in reach. - 2
The 3 a.m. chair
Search Reading Chair and face it at the crib — you'll live in it for months of night feeds. It's the same chair the reading nook uses, because after the nursery era it becomes one.
- 3
Dresser = changing station
Search 3-Drawer Dresser, put it within two steps of the crib, and top it with a changing pad — clothes below, change up top, one piece instead of two. Want the dedicated unit anyway? The Changing Table is in the catalog.
- 4
Light you can live with at night
The Bedside Lamp goes on the dresser — low and warm, enough to change a diaper by, not enough to wake anyone the rest of the way up. The overhead light is for daytime only.
- 5
Rug and basket
The Area Rug 5x7 softens every barefoot crossing; the Storage Basket at the chair's side is where the toys go at the end of the day — one basket, one sweep, done.
- 6
Walk the night path in 3D
Switch to 3D and trace it: door to crib to chair to dresser, in the dark, carrying something precious. Every leg should be short and straight. If anything juts into the path, move it now — not at 3 a.m.
The corner in 3D — short, clear paths between crib, chair, and changing station. - 7
Or let Auto-furnish place the Nursery Corner for you
Everything above can also be done in one go. Open your plan, tap the Auto-furnish wand in the toolbar and drag a box over the spot, tracing the walls you want the pieces against — at least 8 × 10 ft for this layout. In the Ideas list, type Nursery Corner in the search box and pick its card; if it isn't among the first six cards, tap Show more. A Fits badge means the layout fits the box you drew, Tight means it is up to about 12% too big and a piece may sit a little past an edge. The six pieces land against your walls, and Variation 1–5 offer other arrangements — mirrored, turned to another wall or corner, or with a piece swapped for a similar one; where it can, it skips arrangements that would land on furniture already in your plan. If the plan still looks empty after you pick the card, tap Variation 2 (or any other variation) and the pieces appear — a known glitch can leave the first variation undrawn. Tap View in 3D to check it, then Done: the whole placement is one undo step, and every piece stays editable. More in Auto-furnish.
Drawn over the top-left corner of a plain 12×14 ft room, the Nursery Corner lands in a few taps — six pieces, a choice of variations, every piece still editable.
Tips
It works inside your bedroom too
The first months often happen in the parents' room. This corner fits an 8×10 zone of a larger bedroom — put the crib on your side, and check the combined plan in RoomSketch3D so the night path doesn't cross the bed.
Plan the toddler swap now
The crib's footprint is nearly a Toddler Bed's. Duplicate your design, swap the pieces, and see the room's next two years before buying anything.
Blackout is furniture too
A Roller Shade on the nursery window does more for sleep than anything on this floor plan. Add it to the window when you build the real room.
Common mistakes
Crib under the window
Drafts, light, and one day a climbing toddler with a cord in reach. The crib's wall is the one without a window.
A folding chair as the feeding chair
You'll sit there, half-asleep, hundreds of times. A real chair with arms is the difference between a nursery that works and one that hurts.
Storage across the room from the change spot
One hand is always busy. Diapers, wipes, and clothes live in the dresser directly under the changing pad — never across the room.
Frequently asked questions
What furniture does a nursery need?
Six pieces to start: Crib, Reading Chair, 3-Drawer Dresser (with a changing pad on top), Bedside Lamp, Storage Basket, and an Area Rug 5x7.
Do I need a changing table?
A dresser with a changing pad does the same job and stays useful for a decade. If you prefer the dedicated piece, the Changing Table is in the catalog — same placement rule: two steps from the crib.
How much space does a nursery corner need?
8×10 ft for this layout. The pared-down version — crib, chair, basket — fits 6×8 in the corner of the parents' room.
Start designing your room
Put this into practice in the bedroom planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.
Open RoomSketch3DOne-time purchase · No subscription · Web, iOS & Android